Norfolk · England
Bath chip & crack repair in Mill Street, Norfolk
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Mill Street, with a one-year guarantee on every repair.
- Repairs from £95
- Damage beneath the taps
- Chips caused by builders
Bath repair in Mill Street without replacing anything
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. If you are dealing with chips under the taps and rusty patches near the plughole, we can normally put it right, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Area
- Mill Street (NR20)
- Area hub
- Norfolk
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
Honesty matters more than a booking, so here’s what a repair will not do:
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
Do you need bath repair in Mill Street?
The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.
The most common problems we are called about are:
- Snagging damage from a refit
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
- A kit repair that didn’t last
What your quote should include
- Aftercare advice
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- What happens if they find more damage
About Mill Street
Mill Street is about 5 miles north-east of Dereham, in Norfolk. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. We cover 797 places in Norfolk.
Jobs in NR20 work the same way as everywhere else we cover. If you’re just outside Mill Street, we cover Elsing (1 mile south), Lyng (1 mile east), Sparham (2 miles north-east), Bawdeswell (2 miles north) and Lyng Easthaugh (2 miles east). We also work in nearby towns such as Norwich (12 miles south-east), Dereham (5 miles south-west), Wymondham (11 miles south), Sprowston (13 miles east), Thorpe St Andrew (14 miles south-east) and Attleborough (14 miles south).
Local landmarks in Mill Street
Around Mill Street, we work in homes near Lyng Church of England Primary School, St Mary's Church and Sparham Pools. Other landmarks nearby include Morley Castle (1.4 miles west). Not far away are Foxley Wood.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
What your bath is made of matters
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches can be filled and colour matched, in much the same way.
How we price bath repair
Repairs from £95. There’s no charge for travel to Mill Street. The price comes down to:
- The type of damage
- How much damage there is
- Whether old repairs or coatings need taking off
- Doing more than one item at once
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.
Getting a price from pictures
Two or three clear pictures are usually enough. It helps if you send:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- Details of any past repairs
- Where you are, by postcode
For a price in Mill Street, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Repairing versus replacing in Mill Street
People frequently assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why Mill Street customers choose us
- Colours mixed by hand to suit your surface
- Same prices wherever you are
- Straight answers about what a repair can do
- Work done at your home or business
Take a look at our prices page and bath cost comparison.
Places near Mill Street
What else we do in Mill Street
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Mill Street: your questions answered
How invisible is a bath repair?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Do you cover Mill Street?
Yes. We work across the UK and come to Mill Street. Send us pictures for a fixed quote, or call 0345 017 0787.
Is a cracked acrylic bath repairable?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
How do I book?
Use the quote form or ring 0345 017 0787.
How do I get a price for bath repair in Mill Street?
Prices start from £95. Every job gets a fixed price from your pictures. Send a close-up and a picture of the whole item with your NR20 postcode.
I tried a repair kit. Can you fix it?
Yes. We take out the old repair and do it properly. Mention it when you send pictures.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
The process
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. Most visits take a few hours, depending on the damage, including clearing up.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the day after.
How to prepare
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
- Ensure the area is dry
How to get a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
