Norfolk · England
Bath re-enamelling & resurfacing in Mill Street, Norfolk
Bath re-enamelling for Mill Street, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
Bath re-enamelling at your home in Mill Street
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. We work on pressed steel baths, cast iron baths and Victorian roll-tops, and the jobs we see most are a bath that stays dull however much you clean it and a peeling or bubbling previous coating.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will sort it.
- Where
- Mill Street (NR20)
- Region
- Norfolk
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
About Mill Street
Mill Street is about 5 miles north-east of Dereham, in Norfolk. Jobs in Mill Street are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. Mill Street is one of 797 places in Norfolk we cover.
Postcode districts we cover here: NR20. Neighbouring places we cover include Elsing (1 mile south), Lyng (1 mile east), Sparham (2 miles north-east), Bawdeswell (2 miles north) and Lyng Easthaugh (2 miles east). Within a short drive, we also cover Norwich (12 miles south-east), Dereham (5 miles south-west), Wymondham (11 miles south), Sprowston (13 miles east), Thorpe St Andrew (14 miles south-east) and Attleborough (14 miles south).
What’s near Mill Street
Locally, our jobs take us to homes close to Lyng Church of England Primary School, St Mary's Church and Sparham Pools. Well-known places in the area include Morley Castle (1.4 miles west). Not far away are Foxley Wood.
How the visit works
Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. Allow the best part of a day, and we’ll keep you posted as we go.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Open a window if you can
- Make sure the area is dry
- Let us know which floor the room is on
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we take into account:
- How many items we do on one visit
- How hard the colour is to match
- Any earlier repairs that need removing first
- What kind of damage it is
We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Good photos mean an accurate price. Here’s what we find most useful:
- Your postcode, so we can check dates
- The material, if you know it
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Common problems we fix in Mill Street
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Most people contact us when they notice one of these:
- Several chips and rust patches
- Stains that won’t shift
- A coloured bath you want in white
- Enamel that is lost its shine and feels rough
Questions to ask before you book
- How long it needs to cure
- If travel is included in the price
- How long the guarantee is and what it covers
- How to care for the finish
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Should you replace it?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Mill Street. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Mill Street clients choose us
- We leave the room as we found it
- Work done at your home or business
- Everything repaired in place
- Most jobs done in one visit
See our full price list and guide to resurfacing and replacement costs.
Honest limits
To be straight with you, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
- A bath that is rusted through
Send us pictures and we’ll tell you honestly.
Materials we work on in Mill Street
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Landlords, agents and businesses in Mill Street
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Avoid suction-cup mats
- Leave the bath for the full curing time before using it
- Repair dripping taps early
- Have chips seen to early
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Your questions about bath re-enamelling in Mill Street
Will the price change on the day?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
What happens once I’ve sent photos?
You’ll get a fixed quote back, typically with dates to choose from. There is no obligation to book.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Places near Mill Street
Other services in Mill Street
About our accreditations · Every repair comes with a one-year guarantee.
