Highland · Scotland
Bath chip & crack repair in Milton, Highland
Damaged bath in Milton? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- A cracked acrylic bath
- Deep scratches in acrylic
Where we work around Milton
Milton is about 13 miles north-west of Nairn, in Highland. Jobs in Milton are booked in like any other job: a fixed quote from your photos, then a visit to do the work. Milton is one of 253 places in Highland we cover.
All of IV18 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Old Station Road, Ross Crescent and Urquhart Close and the roads around them. If you’re just outside Milton, we cover Kildary (1 mile north-east), Kilmuir (1 mile south-west), Barbaraville (2 miles south-west), Arabella (3 miles north-east) and Nigg (3 miles south-east). We also work in nearby towns such as Nairn (13 miles south-east), Tain (5 miles north), Alness (7 miles south-west), Dornoch (10 miles north), Invergordon (5 miles south-west) and Fortrose (11 miles south). Some remote addresses need extra planning, so call us to arrange it.
Around Milton
Typical jobs here are in homes near Church, among other places. The closest station to Milton is Fearn station, roughly 4 miles north-east of the centre. Well-known places in the area include County Community Hospital (4.2 miles south-west) and Milntown Castle (0.6 miles south-east).
Bath repair in Milton without replacing anything
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. You can usually use the bath the following day. Typical jobs include a failed DIY repair that’s discoloured or lifting and cracks in an acrylic bath, on acrylic, roll-top & freestanding and pressed steel enamel.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Milton (IV18)
- Region
- Highland
- Warranty
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Do you need bath repair in Milton?
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, often before anyone notices. We repair snagging damage like this regularly.
Typical reasons for a call-out include:
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
- Cracks in an acrylic bath
Before you book anyone
- How long it needs to cure
- If travel is included in the price
- What aftercare is recommended
- Whether they match the colour on site
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Work for landlords and builders
For anyone letting property in or around Milton, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Questions from Milton
Can a cracked acrylic bath be fixed?
Frequently, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a picture.
Do you come to Milton?
Yes. We cover the whole UK and come to Milton. Send us photos for a fixed quote, or call 0345 017 0787.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps.
How invisible is a bath repair?
We aim for a repair you cannot easily find. How well it disappears depends on the condition of the rest of the bath.
How long before I can use the bath?
Most baths can be used the day after. We will tell you the exact curing time when we finish.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Repair or replace: which is better?
People frequently assume a cracked or chipped bath has to come out. Normally it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Repair technicians who travel to you, UK-wide
- No extra charge for your area
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
See our full price list or guide to resurfacing and replacement costs.
Also in Milton
What a repair cannot fix
A repair isn’t right for every job, including:
- Cracks in acrylic we cannot reach from underneath
- Rust that has eaten right through a steel bath
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer before you book.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
How to care for the repair
Simple care helps the repair last. Our advice:
- Don’t leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
- A dripping tap stains enamel, so fix it early
- Clean with warm water and a mild detergent
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job usually takes two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the next day.
Preparing for the visit
- Make sure the area is dry
- Tell us if there are stairs or a lift
- Tell us about any previous repairs or coatings
How to get a price
Upload photos of the damage and one of the whole item, and tell us you are in Milton, and we will reply with a fixed quote.
Advice
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
