Highland · Scotland
Bath Repair for Kildary homes
Bath repair for Kildary, without a refit. Send us pictures for a fixed price, then book a visit.
- Repairs from £95
- A chipped rim or side
- Damage done while the bathroom was being fitted
Bath repair in Kildary, done in place
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s chips caused by builders and rust by the waste and overflow, we can help, on whirlpool & spa baths, pressed steel enamel and cast iron enamel alike.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Kildary (IV18)
- Region
- Highland
- Warranty
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What a repair can’t fix
We’d rather lose a job than do one that will not last, so these are the limits:
- Water coming from the waste or taps rather than the bath
- Cracks in acrylic we cannot reach from underneath
- Wear across the entire surface, which needs re-enamelling
If in doubt, send pictures and we will say what we think.
Materials we repair
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Housing associations and facilities teams use us for planned and reactive repairs in Highland and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
How to care for the repair
A little care keeps the finish looking good. Our advice:
- Get any new chip repaired before it rusts
- Protect the bath with a towel when doing jobs nearby
- Don’t leave razors or cans standing in the bath
- Stick to mild cleaners and a soft cloth
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Kildary. The price reflects:
- Doing more than one item at once
- How much damage there is
- The type of damage
- What the surface is made of
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
You can take the photos on your phone. Just make sure we can see:
- What it’s made of, if you know
- Details of any past repairs
- One picture of the entire bath
- A coin or ruler next to the damage for scale
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
What we’re called out for in Kildary
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Common reasons people in Kildary contact us include:
- A cracked acrylic bath
- A chipped rim or side
- Rust spots around the plughole
- Deep scratches in acrylic
Before booking anyone
- Whether a trained technician does the job
- A fixed quote, and whether VAT is included
- Whether cleaning and preparation are in the price
- Whether the price covers travel
Covering Kildary
Kildary is about 14 miles north-west of Nairn, in Highland. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Kildary is one of 253 towns and villages in Highland where we work.
All of IV18 is within our area, from the main roads to the quietest streets. Whether you live on Parkside and Parkhill or a nearby road, we can come to you. We also travel to Milton (1 mile south-west), Kilmuir (1 mile south-west), Barbaraville (2 miles south-west), Arabella (2 miles east) and Pitcalnie (3 miles south-east). We also work in nearby towns such as Nairn (14 miles south-east), Tain (4 miles north), Alness (8 miles south-west), Dornoch (9 miles north), Invergordon (5 miles south-west) and Fortrose (12 miles south). Remote and island addresses take a little more planning, so call us to arrange it.
Around Kildary
Our clients here include homes close to Church. Kildary’s nearest station is Fearn station, roughly 3.4 miles north-east. Further afield, we also cover the area around Milntown Castle (0.9 miles south) and County Community Hospital (4.7 miles south-west). Green spaces nearby include Loch Eye.
Other services in Kildary
Repair or replace in Kildary?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
What you get with us
- Rooms protected and left tidy
- Honest advice, even when it means no job
- A fixed quote before booking
- CHAS, Constructionline and SafeContractor accredited
Take a look at our pricing or guide to resurfacing and replacement costs.
Kildary questions
Are there extra charges for Kildary?
Travel is included in the price, and we charge the same wherever you are.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Do you come to Kildary?
Yes. We work across the UK and travel to Kildary and the rest of Highland. Send us photos for a fixed quote, or call 0345 017 0787.
Can you repair a hole in a bath?
Frequently, if there is access underneath. The hole is backed, filled and refinished to match.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
How do I get a price for bath repair in Kildary?
Prices start from £95. We give a fixed price from your pictures. Send a close-up and a picture of the entire item and your postcode.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Is there any odour?
Some materials have a smell while they’re applied. It fades as everything cures.
The process
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes a morning or an afternoon for most jobs. We leave the room clean and you’ll know when it can be used.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Ensure the area is dry
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
