Somerset · England
Bath Repair for Milverton homes
We travel to Milverton for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Chips under the taps
Our work in Milverton
Milverton is about 3 miles north of Wellington, in Somerset. Anywhere in TA4, we come to you. Milverton is one of 640 places in Somerset we cover.
All of TA4 is covered, from the main roads to the quietest streets. That includes homes on High Street, Station Road and Parsonage Lane and the roads around them. If you are just outside Milverton, we cover Chipley (1 mile south), Fitzhead (2 miles north), Hillcommon (2 miles east), Oake (2 miles east) and Nynehead (2 miles south-east). Within a short drive, we also cover Taunton (7 miles east), Bridgwater (13 miles north-east), Wellington (3 miles south), Sydenham (14 miles north-east), Wilton (6 miles east) and Comeytrowe (5 miles east).
Local landmarks in Milverton
In Milverton, that means homes near The Globe Inn, Milverton Community Primary School and Pre-School and Church of St Michael and the streets around them. A little further out are Merrifield Children's Unit (3 miles east) and Blazes (3.6 miles north-east). Green spaces nearby include Knowle Hill.
How we handle bath repair in Milverton
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. We work on acrylic, whirlpool & spa baths and cast iron enamel, and common reasons people contact us are damage done while the bathroom was being fitted and scuffs and scratches in the surface.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Where
- Milverton (TA4)
- Region
- Somerset
- Guarantee
- A year, on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Milverton
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. We repair snagging damage like this regularly.
These are the problems we’re asked about most:
- A hole punched through by something heavy
- Scuffs and scratches in the surface
- Chips along the edge of the bath
- Rust spots around the plughole
Questions to ask before booking
- The length of the guarantee and what it covers
- What preparation is included
- Whether the price covers travel
- How long it needs to cure
Milverton: your questions answered
Is a holed acrylic bath repairable?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Is repairing better than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What about rust by the waste?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is a bath repair permanent?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Make sure an acrylic bath is firm underfoot
- Put a towel in the bath if you are working above it
- Stick to mild cleaners and a soft cloth
- Have new chips seen to early
Care for the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
How the visit works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, we check the damage against your pictures and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Open a window if you can
- Mention any parking restrictions or tricky access
- Clear the area around the damage
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Read more
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why Milverton clients choose us
- Everything repaired in place
- Most jobs done in one visit
- Same prices wherever you are
- Honest advice, even when it means no job
See our pricing or guide to resurfacing and replacement costs.
Landlords, agents and businesses in Milverton
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
Also near Milverton
What else we do in Milverton
About our accreditations · Every repair comes with a one-year guarantee.
