Somerset · England
Bath chip & crack repair in Wellington, Somerset
Chip and crack repairs to enamel, acrylic and cast iron baths in Wellington, carried out at your home and guaranteed for a year.
- Repairs from £95
- A kit repair that didn’t last
- Damage done while the bathroom was being fitted
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
About our bath repair in Wellington
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. A repair stops both. We’re often asked to fix a failed DIY repair that’s discoloured or lifting and hairline or through cracks in acrylic, across acrylic, pressed steel enamel and cast iron enamel.
You get a one-year guarantee, the same in Wellington as everywhere else we work.
- Where
- Wellington (TA21)
- Area hub
- Somerset
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Wellington
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
It’s worth getting a quote if you see:
- Hairline or through cracks in acrylic
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
- Damage done while the bathroom was being fitted
Before booking anyone
- Whether there are any call-out or travel charges
- What preparation is included
- How the room is protected while they work
- When it can be used again
What a repair can’t fix
We will always be straight with you, so here’s what a repair can’t fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in acrylic we cannot reach from underneath
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Also near Wellington
Also in Wellington
What we do, step by step
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow two to three hours for most chips from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can usually use the bath the day after.
Preparing for the visit
- Let us know which floor the room is on
- Open a window if you can
- Tell us about any previous repairs or coatings
Getting a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll say straight away if a repair is the right fix.
Related advice
Common questions in Wellington
Is the work guaranteed?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Something went through my bath. Can it be fixed?
Typically. Send us a picture of the hole and one from under the bath if you can.
Which areas do you work in?
Across the UK. Our prices are the same everywhere.
Do you do work for letting agents?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Wellington.
Can you repair something that’s been repaired before?
In most cases. We remove the old repair before doing a new one, so mention it when you send photos.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
Where we work around Wellington
Wellington is about 6 miles south-west of Taunton, in Somerset. Anywhere in TA21, we carry out the work at your property. We work in 640 places in Somerset.
Jobs in TA21 work the same way as everywhere else we cover. You will find streets such as High Street, Station Road and White Hart Lane, all of which we cover. With the A38 and B3187 close by, Wellington is simple for us to get to. Nearby, we also work in Rockwell Green (1 mile south-west), Chelston (1 mile east), Westford (1 mile west), Bagley Green (1 mile south-west) and Pleamore Cross (2 miles south-west). Further out, we also cover Taunton (6 miles north-east), Bridgwater (14 miles north-east), Chard (14 miles south-east), Sydenham (15 miles north-east), Wilton (6 miles east) and Comeytrowe (4 miles north-east). As one of the bigger places in Somerset, Wellington is somewhere we visit frequently.
Around Wellington
In Wellington, that means homes near Rule 7 pub, St John's Church of England Primary School and Court Fields School. Further afield, we also cover the area around Merrifield Children's Unit (4.5 miles north). Green spaces nearby include Knowle Hill.
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. Our prices are the same across the UK, with no extra for Wellington. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Every repair guaranteed for a year
- We come to you, anywhere in the UK
- Colour mixed on the day to match
- We will tell you if it’s not worth repairing
Take a look at our full price list or guide to resurfacing and replacement costs.
Keeping it looking good
Aftercare is simple:
- Do not scrub with anything abrasive
- Protect the bath with a towel when doing jobs nearby
- Clean with warm water and a mild detergent
- Rinse the bath after use, especially in hard water areas
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Landlord and trade work in Wellington
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
About our accreditations · Every repair comes with a one-year guarantee.
