Powys · Wales
Bath chip & crack repair in Moel y Garth, Powys
Fixed-price bath repair in Moel y Garth and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chips caused by builders
- Scratches you can feel with a fingernail
Should you replace it?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Work done at your home or business
- One price list for the whole UK
- CHAS and Constructionline accredited
- A year’s guarantee on all work
Take a look at our full price list or guide to resurfacing and replacement costs.
Bath repair in Moel y Garth without replacing anything
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. Our technicians work on cast iron enamel, whirlpool & spa baths and pressed steel enamel, and people most often call us about deep scratches in acrylic and a cracked acrylic bath.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Moel y Garth (SY21)
- Region
- Powys
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Moel y Garth
What else we do in Moel y Garth
Aftercare tips
Simple care helps the repair last. We recommend:
- Don’t leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
- Use a soft cloth and washing-up liquid for everyday cleaning
- Check that an acrylic bath does not move when you stand in it
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
What we’re called out for in Moel y Garth
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
People typically call us after spotting something like this:
- A kit repair that didn’t last
- Chips on the rim or sides
- Hairline or through cracks in acrylic
- Deep scratches in acrylic
Comparing quotes
- Who turns up on the day
- If travel is included in the price
- Whether the price is fixed and includes VAT
- Aftercare advice
Honest limits
Before booking, it’s worth knowing the limits:
- Flexing caused by a failed cradle or loose feet
- Wear across the whole surface, which needs re-enamelling
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Moel y Garth
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
What affects the price in Moel y Garth
Repairs from £95. There is no area surcharge for Moel y Garth. The price reflects:
- How many items we do on one visit
- How much damage there is
- What the surface is made of
- The colour and finish to match
Our prices are the same across the UK, with no extra for Moel y Garth. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from photos
You can take the photos on your phone, there is no need for anything special. Ensure they show:
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- Natural light rather than flash
- One picture of the entire bath
Email us a photo of the damage and a wider shot of the whole item, with your SY21 postcode, and we will come back with a fixed quote.
Landlords, agents and businesses in Moel y Garth
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
FAQs for Moel y Garth
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including pastel and older colours.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Do you work in Moel y Garth?
Yes. We cover the whole UK and come to Moel y Garth. Send photos and we’ll quote, or call 0345 017 0787.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can usually use the bath the following day.
Preparing for the visit
- Make sure the area is dry
- Mention if the room is upstairs or in a flat
- Have a window or extractor fan available
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed quote. There is no charge for the quote and no obligation.
Related advice
About Moel y Garth
Moel y Garth is about 13 miles north-east of Y Drenewydd, in Powys. We travel to homes and businesses in Moel y Garth and nearby villages, so you do not need to take anything anywhere. Moel y Garth is one of 234 places in Powys where we work. You can also see our page for Liverpool, about 51 miles away.
Our technicians cover all of SY21. If you are just outside Moel y Garth, we cover Groes-lwyd (1 mile north-east), Guilsfield (2 miles east), Cegidfa (2 miles north-east), Bron-y-Buckley (2 miles south-east) and Trelydan (2 miles east). Within a short drive, we also cover Y Drenewydd (13 miles south-west), Newtown and Llanllwchaiarn (12 miles south-west), Penygloddfa (12 miles south-west), Pen-y-Glodfa (12 miles south-west), Bryn (12 miles south-west) and Garth Owen (13 miles south-west).
Near you in Moel y Garth
For rail, the closest station is Welshpool station, about 2.6 miles south-east of the centre. A little further out are Victoria Memorial Hospital (2.3 miles south-east) and Powys Castle Museum (2.5 miles south-east). Not far away are Llyn Du and Bryn Fron-fawr.
About our accreditations · Every repair comes with a one-year guarantee.
