North Lanarkshire · Scotland
Bath Repair in Mollinsburn
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Mollinsburn. Free, fixed quotes from your pictures.
- Repairs from £95
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
About our bath repair in Mollinsburn
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can generally use the bath the following day. We regularly repair pressed steel enamel, whirlpool & spa baths and roll-top & freestanding, and people most often call us about chips under the taps and snagging damage from a refit.
A one-year guarantee comes as standard.
- Area
- Mollinsburn (G67)
- Area hub
- North Lanarkshire
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Prices and what affects them
Repairs from £95. You won’t pay by the hour. The price depends on:
- How much damage there is
- Where the damage is and how we get to it
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from pictures
Before you send photos, these tips help us give you a firm price:
- Natural light rather than flash
- Where you are, by postcode
- What it’s made of, if you know
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
What happens on the day
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a morning or an afternoon from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Tell us about any previous repairs or coatings
- Ensure the area is dry
- Open a window if you can
How to get a price
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Related advice
Mollinsburn and nearby
Mollinsburn is about 3 miles south-west of Cumbernauld, in North Lanarkshire. Wherever you are in the G67 postcode area, we come to you. Our technicians cover 89 places in North Lanarkshire. Our nearest city page is Glasgow, about 10 miles away.
Jobs in G67 are booked in the same way as anywhere else. Whether you live on Main Road, Airdrie Road and Cumbernauld Road or anywhere nearby, we can come to you. Neighbouring places we cover include Annathill (1 mile south-east), Westfield (1 mile north), Moodiesburn (1 mile west), Condorrat (1 mile north-east) and Greenfoot (2 miles south-east). Larger places within reach include Motherwell (9 miles south), Cumbernauld (3 miles north-east), Coatbridge (5 miles south), Airdrie (5 miles south-east), Wishaw (11 miles south-east) and Bellshill (7 miles south).
Near you in Mollinsburn
Typical jobs here are in homes near Greenfaulds High School. For rail, the closest station is Greenfaulds station, roughly 2.4 miles north-east. Nearby you will also find Antonine Centre (3 miles north-east) and Woodilee Hospital (3.5 miles west). Open spaces near Mollinsburn include Bar Hill and Gadloch.
Places near Mollinsburn
Other services in Mollinsburn
How to care for the repair
Looking after the surface is easy:
- Keep abrasive pads and gritty cleaners away from the bath
- Give the bath a quick rinse after use
- Cover the bath during DIY or decorating
- Don’t leave razors or cans standing in the bath
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Until we visit, a strip of waterproof tape over the damage helps, so water can’t get in. Remove it before the repair.
When to call us in Mollinsburn
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
It’s worth getting a quote if you see:
- An old repair that has yellowed or come loose
- Scuffs and scratches in the surface
- Rust spots around the plughole
- A chipped rim or side
Before you book anyone
- How soon you can use it again
- How the room is protected while they work
- Whether cleaning and preparation are in the price
- How to care for the finish
Landlords, agents and businesses in Mollinsburn
We carry out planned and one-off repairs for housing associations and facilities teams in North Lanarkshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
When we would advise against a repair
In fairness, there are a few things a repair will not fix:
- Acrylic cracks with no access behind them
- Wear across the whole surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
Send us pictures and we will tell you honestly.
Materials we work on in Mollinsburn
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
Why repair rather than replace?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Prices start from £95. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- Fixed prices from your photos
- We come to you, anywhere in the UK
- Colours mixed by hand to suit your surface
- One price list for the whole UK
Read our pricing or bath cost comparison.
Questions from Mollinsburn
How do I book?
Just pictures, your postcode and a contact number. On the day, access to the room.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Is a bath repair permanent?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Can you repair something that is been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
How long does the repair take to cure?
Usually within a day, depending on the repair.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Mollinsburn.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
About our accreditations · Every repair comes with a one-year guarantee.
