Birmingham · England

Bath Repair for Moor Pool homes

Fixed-price bath repair in Moor Pool and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • Chips along the edge of the bath
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Moor Pool

Bath repair at your home in Moor Pool

We’ve repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands with a one-year guarantee. Common call-outs are for damage beneath the taps and a cracked acrylic bath, in whirlpool & spa baths, pressed steel enamel and roll-top & freestanding.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.

Where
Moor Pool (B17, B15)
County
Birmingham
Cover
A year, on every repair
Price
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

When a repair isn’t the answer

Some jobs aren’t right for a repair, for example:

  • Rust that has eaten right through a steel bath
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Wear across the whole surface, which needs re-enamelling

Send us pictures and we will tell you honestly.

What we work on

  • Acrylic
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel

Aftercare tips

How the surface is treated afterwards matters. Here’s what we suggest:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Give the bath a quick rinse after use
  • Don’t leave a fresh chip for long
  • Get a dripping tap fixed promptly

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.

What your bath is made of matters

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

Why repair rather than replace?

Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access.

Why Moor Pool clients choose us

  • A year’s guarantee on all work
  • No extra charge for your area
  • Fixed prices from your photos
  • Everything repaired in place

Take a look at our prices page and guide to resurfacing and replacement costs.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.

What happens on the day

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a few hours. We clean up when we’re done and let you know when you can use it again.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. Filler goes in and is sanded flush once it has set.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, normally the day after.

Preparing for the visit

  • Open a window if you can
  • Avoid using the area for a few hours before we arrive
  • Mention any earlier repairs or resurfacing

Ask for a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a free quote

Related advice

How we price bath repair

Repairs from £95. A fixed quote means you know the cost before booking. We take into account:

  • How much damage there is
  • Doing more than one item at once
  • The colour and finish to match
  • Access to the area

We charge the same wherever you are, with no extra for Moor Pool. The job itself decides the price: how much damage, what it’s made of and how many items.

Getting a price from pictures

You can generally get a fixed quote without us visiting. To help us price it:

  • The material, if you know it
  • Any earlier repairs or coatings
  • Your postcode, so we can check dates
  • One picture of the entire bath

Send us pictures of the damage and one of the whole item, with your B17 postcode, and we’ll reply with a fixed quote.

Moor Pool and nearby

Moor Pool is about 2 miles south of Smethwick, in Birmingham. Jobs in Moor Pool are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. We work in 140 places in Birmingham, from the larger towns to small villages.

Our technicians cover all of the B17 and B15 postcode area. Whether you live on War Lane, Rose Road and Abbey Road or a nearby road, a technician can come to you. Neighbouring places we cover include Harborne (1 mile south-west), Beech Lanes (1 mile west), Bournbrook (1 mile south-east), Edgbaston (1 mile east) and Bearwood (1 mile north-west). Larger places within reach include Birmingham (3 miles east), Royal Sutton Coldfield (9 miles north-east), Erdington (6 miles north-east), Streetly (9 miles north), Hawkesley (4 miles south) and Sparkbrook (3 miles east).

Near you in Moor Pool

Our customers here include homes close to Harborne Reserve, Harborne Academy and Saint John's Church and the streets around them. Nearby too are The Junction pub (less than half a mile south), Harborne Primary School (within half a mile south-west), Birmingham Blue Coat School (under half a mile east) and St Faith and St Laurence's Church (1 mile west). For rail, the closest station is University (Birmingham) station, roughly 0.8 miles south-east. Further afield, we also cover the area around Birmingham Women's Hospital (0.6 miles south-east) and The Museum of Saint John Henry Cardinal Newman (1.2 miles north-east). Green spaces nearby include Deer's Leap Wood and Portway Hill.

  • Other local spots include Weoley (1.8 miles south-west)
Map of Moor Pool © OpenStreetMap contributors

Moor Pool questions

I tried a repair kit. Can you fix it?

Regularly. We strip it out, deal with any rust and repair it again.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit usually costs less than separate visits. Include photos of each item.

Can landlords book you?

We do, regularly. We can quote for several properties together and work between tenancies.

It’s been repaired before. Can you still fix it?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Are there extra charges for Moor Pool?

Travel is included in the price, with the same prices everywhere we work.

Can you repair a hole in a bath?

Generally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.

What we are called out for in Moor Pool

Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: the bath isn’t properly supported, so it flexes under weight.

Get in touch if you’ve noticed:

  • Rust spots around the plughole
  • Scuffs and scratches in the surface
  • A chip where the taps sit
  • Damage done while the bathroom was being fitted

Comparing quotes

  • If travel is included in the price
  • Whether cleaning and preparation are in the price
  • A fixed quote, and whether VAT is included
  • Who will actually do the work

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.