Kirklees · England
Bath chip & crack repair in Moor Side, Kirklees
Bath repair for Moor Side, without a refit. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- A chip where the taps sit
- Deep scratches in acrylic
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Clean with warm water and a mild detergent
- Protect the bath with a towel when doing jobs nearby
- Do not leave a fresh chip for long
- Keep abrasive pads and gritty cleaners away from the bath
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
About our bath repair in Moor Side
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We regularly repair whirlpool & spa baths, pressed steel enamel and acrylic, and the jobs we see most are cracks in an acrylic bath and a kit repair that didn’t last.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone.
- Where
- Moor Side (HD8)
- County
- Kirklees
- Guarantee
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Landlords, agents and businesses in Moor Side
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Covering Moor Side
Moor Side is about 4 miles south-east of Huddersfield, in Kirklees. Jobs in Moor Side are booked in like any other job: a fixed quote from photos, then a visit to do the work. Moor Side is one of 189 towns and villages in Kirklees we cover. Our nearest city page is Leeds, about 16 miles away.
Postcode districts we cover here: HD8. Nearby, we also work in Storthes Hall (1 mile north-east), Farnley Tyas (1 mile west), Highburton (1 mile north-east), Kirkburton (1 mile east) and Fenay Bridge (2 miles north). Further out, we also cover Huddersfield (4 miles north-west), Dewsbury (7 miles north-east), Batley (8 miles north-east), Mirfield (5 miles north), Liversedge (7 miles north) and Cleckheaton (8 miles north).
What’s near Moor Side
In Moor Side, that means homes near Church of St Lucius, Golden Cock pub and King James's School and the streets around them. The closest station to Moor Side is Stocksmoor station, roughly 1.1 miles south-east. A little further out are Storthes Hall Hospital (under half a mile north-east) and Piazza Centre (3.1 miles north-west). The countryside around Moor Side includes Castle Hill.
- Local facilities include Cumberworth Half (2.8 miles south-east)
When we would advise against a repair
In fairness, some problems need a different fix:
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
Can I fix it myself?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Moor Side: your questions answered
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
How long before I can use the bath?
Usually the next day. We confirm the time before we leave.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Is a holed acrylic bath repairable?
Often, if there is access underneath. We back the hole, fill it and refinish the surface.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you match an avocado or pink bath?
Yes. We mix the colour on the day to match, including older coloured suites.
Places near Moor Side
More services for Moor Side
Common problems we fix in Moor Side
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.
Get in touch if you’ve noticed any of these:
- Hairline or through cracks in acrylic
- Deep scratches in acrylic
- Chips caused by builders
- Chips under the taps
Before you book anyone
- How soon you can use it again
- What prep work is covered
- Whether the price is fixed and includes VAT
- Aftercare advice
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which typically takes a morning or an afternoon. If anything looks different from your pictures, we will talk to you before going ahead.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the next day, the bath is ready to use.
Getting ready for the visit
- Make sure the area is dry
- Make sure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Composite and resin
Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.
Repair or replace in Moor Side?
A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.
Why choose Surface Doctor in Moor Side
- Colours mixed by hand to suit your surface
- A year’s guarantee on all work
- No need to remove anything
- CHAS and Constructionline accredited
Take a look at our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
