Norfolk · England
Bath chip & crack repair in Morley St Peter, Norfolk
Problem with your bath in Morley St Peter? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Chips on the rim or sides
- Deep scratches in acrylic
What affects the price in Morley St Peter
Prices start from £95. Quotes are free and the price is fixed. What we take into account:
- The material
- The size and number of damaged areas
- What kind of damage it is
- How many items we do on one visit
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- The material, if you know it
- Your postcode, so we can check dates
- One sharp close-up of the damage
- Any earlier repairs or coatings
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Bath repair at your home in Morley St Peter
A typical bath repair is a few hours’ work, and you can typically bathe again the following day. There’s no need to book a plumber or tiler, because the bath doesn’t move. We are often asked to fix rust by the waste and overflow and a chipped rim or side, across acrylic, pressed steel enamel and roll-top & freestanding.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Area
- Morley St Peter (NR18)
- Region
- Norfolk
- Cover
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Morley St Peter
Also in Morley St Peter
Landlords, agents and businesses in Morley St Peter
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
The process
Nothing needs to be moved out of the room. We bring everything we need with us, put protection down and start once you’re happy with the plan. It usually takes a morning or an afternoon, and you can get on with other things while we’re there.
- First, we check the damage against your photos and agree the plan.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
Advice
What we’re called out for in Morley St Peter
A cracked acrylic bath usually wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until the acrylic gives way.
People usually call us after spotting one of these:
- Chips under the taps
- Damage done while the bathroom was being fitted
- Cracks in an acrylic bath
- Rust by the waste and overflow
What your quote should include
- How long it needs to cure
- If travel is included in the price
- What happens if the damage is worse than the photos show
- Whether they match the colour on site
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.
Morley St Peter: your questions answered
Is the work guaranteed?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
How quickly can you book me in?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
How invisible is a bath repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Morley St Peter.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Our bath repair starts from £95. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- One visit for most repairs
- A fixed quote before you book
- Colour mixed on the day to match
- One price list for the whole UK
Take a look at our pricing or guide to resurfacing and replacement costs.
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Covering Morley St Peter
Morley St Peter is about 2 miles north-east of Attleborough, in Norfolk. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 797 towns and villages across Norfolk.
Jobs in NR18 are booked in the same way as anywhere else. Nearby, we also work in Morley St Botolph (1 mile north-east), Besthorpe (1 mile south), Deopham Green (1 mile north-west), Fiddlers' Green (2 miles south-west) and Suton Street (2 miles east). We also work in nearby towns such as Norwich (12 miles north-east), Thetford (15 miles south-west), Dereham (10 miles north-west), Wymondham (4 miles north-east), Sprowston (14 miles north-east) and Thorpe St Andrew (14 miles north-east).
Landmarks near Morley St Peter
Around Morley St Peter, we work in homes near Wymondham College, Church of St Peter and Morley Church of England Primary School and the streets around them. The closest station to Morley St Peter is Spooner Row station, about 1.9 miles east. Nearby you will also find Morley Old Hall (0.6 miles north-west) and Wymondham Heritage Museum (3.8 miles north-east).
What we cannot put right
It helps to know what we can’t do:
- A steel bath rusted through
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we can’t get to from below
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
About our accreditations · Every repair comes with a one-year guarantee.
