Lincolnshire · England
Bath chip & crack repair in Moulton, Lincolnshire
Problem with your bath in Moulton? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Holes from dropped items
- Scratches you can feel with a fingernail
Bath repair in Moulton, done in place
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. If you’re dealing with a failed DIY repair that’s discoloured or lifting and a hole punched through by something heavy, we can typically put it right, on roll-top & freestanding, pressed steel enamel and acrylic alike.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Moulton (PE12)
- Region
- Lincolnshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Your questions about bath repair in Moulton
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Can you quote from pictures?
In nearly every case. If photos do not show enough, we will ask for another angle.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. Anything extra is discussed before we begin.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you repair a crack in an acrylic bath?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
When to call us in Moulton
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Typical reasons for a call-out include:
- An old repair that has yellowed or come loose
- Impact holes in acrylic
- Chips caused by builders
- A chipped rim or side
Before you book anyone
- How long the guarantee is and what it covers
- How the colour is matched
- How soon you can use it again
- What preparation is included
What bath repair costs
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Previous DIY repairs that have to come out
- How hard the colour is to match
- The size and number of damaged areas
- How many items we do on one visit
A repair typically costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- A close-up of the damage, in focus
- A photo taken from further back
- The postcode, so we can plan the visit
- Something in shot to show the size
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
How to care for the repair
Once the work has cured, treat it gently:
- Do not leave razors or cans standing in the bath
- Get a dripping tap fixed promptly
- Do not scrub with anything abrasive
- Stick to mild cleaners and a soft cloth
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. And fix dripping taps promptly.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Moulton and nearby
Moulton is about 4 miles east of Spalding, in Lincolnshire. Jobs in Moulton are booked in like any other job: a fixed quote from your photos, then a visit to do the work. We work in 732 places across Lincolnshire. Our nearest city page is Birmingham, about 80 miles away.
Every address in PE12 is covered, from the main roads to the quietest streets. Local streets include High Street, Harrox Square and Church Walk. Moulton is on the B1357, so it’s easy for us to reach. Nearby, we also work in Whaplode (1 mile east), Austendike (1 mile south), Weston Hills (2 miles south-west), Whaplode St Catherine (3 miles south-east) and Moulton Chapel (4 miles south). Within a short drive, we also cover Boston (12 miles north), Spalding (4 miles west), Bourne (13 miles west), Holbeach (3 miles east), Austerby (13 miles west) and Market Deeping (13 miles south-west).
Local landmarks in Moulton
Locally, our jobs take us to homes close to The John Harrox Primary School, Church of All Saints and The Swan Public House, among other places. For rail, the closest station is Spalding station, roughly 3.9 miles west. Other landmarks nearby include Museum of Entertainment (2.9 miles south-east) and Moulton Castle (1.7 miles south).
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
Work for landlords and builders
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
Materials and what they mean for the repair
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.
Repair or replace in Moulton?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- No need to remove anything
- Work done at your home or business
- Most jobs done in one visit
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our full price list or resurfacing vs replacement cost guide.
Places near Moulton
Also in Moulton
How it works
The work is clean and fairly quiet. We protect the area first, then the work takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to care for it.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the next day, the bath is ready to use.
Getting ready for the visit
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
- Clear the area around the damage
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
