Surrey · England

Bath Repair in Mousehill

Bath repair in and around Mousehill: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Cracks in an acrylic bath
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Mousehill

Bath repair at your home in Mousehill

It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Common call-outs are for chips under the taps and rusty patches near the plughole, in whirlpool & spa baths, acrylic and pressed steel enamel.

We guarantee the work for a year. If something isn’t right in that time, we come back and put it right.

Before and after: a chipped, rust-stained bath around the plughole
Area
Mousehill (GU8)
Area hub
Surrey
Guarantee
12 months on all our work
Quotes
From £95. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

Should you replace it?

Swapping a damaged bath for a new one typically means a plumber, removing the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it deals only with the damage in one visit. Our bath repair starts from £95. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why book with us

  • CHAS, Constructionline and SafeContractor accredited
  • Straight answers about what a repair can do
  • Most jobs done in one visit
  • Nothing taken out or refitted

See our full price list or guide to resurfacing and replacement costs.

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

What a repair cannot fix

It helps to know what we cannot do too:

  • Cracks in acrylic we can’t reach from underneath
  • Metal that has corroded all the way through
  • Flexing caused by a failed cradle or loose feet

If in doubt, send photos and we will say what we think.

Materials we repair

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding

When to call us in Mousehill

Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

Signs it’s time to call us include:

  • Holes from dropped items
  • Deep scratches in acrylic
  • Chips along the edge of the bath
  • A cracked acrylic bath

What to look for in a quote

  • How changes to the job are handled
  • How to care for the finish
  • If travel is included in the price
  • Whether the colour is mixed to match

Our hiring checklist

Questions from Mousehill

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.

Will it make a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

What happens after I send photos?

You get a fixed price and available dates. If we need another angle, we’ll ask.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

When can you do it?

We’ll give you dates with your quote. Tell us if you need it done quickly.

Can you repair something that’s been repaired before?

In most cases. We remove the old repair before doing a new one, so let us know about it.

Where we work around Mousehill

Mousehill is about 6 miles south-west of Guildford, in Surrey. From the centre of Mousehill to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Mousehill is one of 395 places in Surrey where we work. We work right across the region, from Mousehill to London (33 miles away).

We work across the GU8 postcode area. Local streets include Green Lane, The Cedars and Moushill Lane, and we cover them all. Close by, we cover Milford (1 mile north-east), Cramhurst (1 mile south), Ockford Ridge (1 mile south-east), Witley (1 mile south) and Tuesley (1 mile east). Further out, we also cover Guildford (6 miles north-east), Woking (11 miles north), Camberley (12 miles north), Farnham (7 miles north-west), Dorking (15 miles east) and Frimley (11 miles north).

What’s near Mousehill

Typical jobs here are in homes near The White Lion pub, Rodborough Common and Rodborough, among other places. Nearby too are Milford School (less than half a mile north-east) and St John the Evangelist's Church (under half a mile north-east). The closest station to Mousehill is Milford (Surrey) station, roughly 0.7 miles south-east of the centre. Well-known places in the area include Milford Hospital (1.1 miles east) and Godalming Museum (2 miles north-east). Green spaces nearby include Frith Hill and Lower Lake.

Map of Mousehill © OpenStreetMap contributors

Different materials, different repairs

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.

For landlords and businesses

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

How it works

Arrival times are agreed in advance. Once we are there, the work takes a few hours. The room is left tidy.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

Getting ready for the visit

  • Open a window if you can
  • Have somewhere for us to park nearby if possible
  • Tell us about any previous repairs or coatings

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.

Get a fixed price

Related advice

Keeping it looking good

A little care keeps the finish looking good. We recommend:

  • Fix dripping taps early to stop staining and limescale
  • Rinse it down after each bath
  • Clean with warm water and a mild detergent
  • Avoid scourers, wire wool and gritty cream cleaners

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust sets in.

If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.