Surrey · England
Bath Repair for Cramhurst homes
We travel to Cramhurst for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips along the edge of the bath
For landlords and businesses
We work for landlords, letting agents and housing providers in Cramhurst as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
Bath repair in Cramhurst, done in place
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. If you’re dealing with damage beneath the taps and snagging damage from a refit, we can help.
Every repair comes with a one-year guarantee, wherever you are in Surrey.
- Where
- Cramhurst (GU8)
- Area hub
- Surrey
- Cover
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
Keeping it looking good
Looking after the surface is easy:
- Put a towel in the bath if you are working above it
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
- Clean with warm water and a mild detergent
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Small chips are quick to repair. Left alone, they stain and can rust, so early repair saves time and money.
Where we work around Cramhurst
Cramhurst is about 7 miles south-west of Guildford, in Surrey. Across the GU8 area, we come to you. Our technicians cover all 395 towns and villages in Surrey. Our jobs stretch from Cramhurst to London (about 34 miles away).
Jobs in GU8 are booked in the same way as anywhere else. Whether you live on Merryacres, Martins Wood and Cramhurst Lane or a nearby road, a technician can come to you. If you’re just outside Cramhurst, we cover Witley (1 mile south), Mousehill (1 mile north), Ockford Ridge (1 mile east), Milford (1 mile north) and Enton Green (1 mile east). Larger places within reach include Guildford (7 miles north-east), Woking (11 miles north), Camberley (12 miles north), Farnham (7 miles north-west), Dorking (15 miles east) and Frimley (11 miles north).
Landmarks near Cramhurst
Around Cramhurst, we work in homes near The Star Public House, Rodborough and Rodborough Common and the streets around them. Also close by are St John the Evangelist's Church (0.7 miles north-east) and The Chandler CofE Aided Junior School (0.6 miles south-east). For rail, the closest station is Milford (Surrey) station, about 0.8 miles east. Other landmarks nearby include Godalming Museum (2.4 miles north-east) and Milford Hospital (1.3 miles east). The countryside around Cramhurst includes Hydon's Ball and Farncombe Wood.
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Cramhurst customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- No need to remove anything
- Straight answers about what a repair can do
- Same prices wherever you are
See our full price list or guide to resurfacing and replacement costs.
What affects the price in Cramhurst
Prices start from £95. There’s no area surcharge for Cramhurst. What changes the price is:
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
- The size and number of damaged areas
- Doing more than one item at once
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from pictures
Photographing the damage takes a minute. Try to send:
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Where you are, by postcode
- A clear, close picture of the problem area
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Towns and villages near Cramhurst
Other services in Cramhurst
Do you need bath repair in Cramhurst?
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Fittings cause damage too: water collects there, so chips nearby rust quickly.
If you can see any of these, send us a photo:
- Chips along the edge of the bath
- Impact holes in acrylic
- Snagging damage from a refit
- Rust by the waste and overflow
Comparing quotes
- The length of the guarantee and what it covers
- What aftercare is recommended
- Whether there are any call-out or travel charges
- How the colour is matched
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cramhurst questions
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What happens next?
We look at the photos and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a morning or an afternoon. We clean up when we are done and tell you when it’s ready to use.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
- Plan for the room to be out of bounds to pets and children
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
