Darlington · England

Bath chip & crack repair in Mowden, Darlington

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Mowden and across Darlington. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Rust spots around the plughole
  • Holes from dropped items
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Mowden

Bath repair in Mowden without replacing anything

A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. Common call-outs are for a cracked acrylic bath and damage beneath the taps, on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths.

Your repair is guaranteed for a year, as with every job we do.

Where
Mowden (DL3, DL2)
County
Darlington
Cover
12 months on all our work
Price
From £95. Fixed and free, based on photos
Call
0345 017 0787
Last updated
23 October 2026
Before and after: a chipped, rust-stained bath around the plughole

What bath repair costs

Prices start from £95. You will not pay by the hour. The price depends on:

  • What kind of damage it is
  • Whether old repairs or coatings need taking off
  • What the surface is made of
  • How easy the damage is to reach

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Send pictures for a quote

We price nearly every job from pictures. This is what we need:

  • The material, if you know it
  • A close-up of the damage, in focus
  • Your postcode, so we can check dates
  • Whether it’s been repaired or coated before

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.

The process

On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes a few hours, depending on the damage. We tidy up before we leave and tell you when it’s ready to use.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Preparing for the visit

  • Make sure the area is dry
  • Keep pets and children out of the room while we work
  • Let us know which floor the room is on

Get a quote

If you’re in Mowden and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Advice

Mowden questions

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as householders across Darlington.

Is my repair covered?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is it safe with children and pets around?

Just keep them out of the work area. We will let you know when it’s safe to use again.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

I’m a tenant. Can you help?

Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.

How do I get a price for bath repair in Mowden?

Prices start from £95. We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your DL3 postcode.

How do I book?

A close-up, a wider photo and your postcode. Then we’ll agree a date.

What we’re called out for in Mowden

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.

Most people contact us when they notice something like this:

  • A chip where the taps sit
  • Impact holes in acrylic
  • Scratches you can feel with a fingernail
  • A failed DIY repair that’s discoloured or lifting

Before you book anyone

  • What happens if they find more damage
  • How long it needs to cure
  • How your room will be protected
  • A fixed price, and whether VAT is included

Choosing a repair company

Where we work around Mowden

Mowden is about 2 miles west of Darlington, in Darlington. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Mowden is one of 53 places in Darlington we cover. Our nearest city page is Newcastle upon Tyne, about 32 miles away.

Postcode districts we cover here: DL3 and DL2. Local streets include Barnes Road, Newton Lane and Nunnery Lane, all of which we cover. Close by, we cover Branksome (1 mile north), Hummersknott (1 mile south), Cockerton (1 mile east), West Park (1 mile north) and Faverdale (1 mile north-east). Larger places within reach include Eastbourne (3 miles east), Middleton St George (5 miles east), Haughton-le-Skerne (3 miles east), Whinfield (3 miles east), Firth Moor (3 miles south-east) and Hurworth-on-Tees (4 miles south-east). Mowden is among the bigger towns we cover in Darlington.

Near you in Mowden

Our customers here include homes close to South Park, St Mary and Mowden Junior School, among other places. You will also find The Deacon pub (within half a mile north-east) and Branksome School (less than half a mile north-west). The closest station to Mowden is North Road station, roughly 1.6 miles east of the centre. A little further out are West Park Hospital (0.7 miles north) and Walworth Castle (2.8 miles north-west).

Map of Mowden © OpenStreetMap contributors

For landlords and businesses

For anyone letting property in or around Mowden, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

DIY kit or professional repair?

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.

What a repair cannot fix

A repair is not right for every job, for example:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A steel bath rusted through
  • Cracks in parts of an acrylic bath we can’t get to from below

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Cast iron enamel
  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Acrylic
  • Pressed steel enamel

Repair or replace: which is better?

Replacing a fitted bath normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in one visit. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.

Why us?

  • Rooms protected and left tidy
  • Typically one visit, start to finish
  • CHAS, Constructionline and SafeContractor accredited
  • Colour mixed on the day to match

Take a look at our pricing and resurfacing vs replacement cost guide.

Aftercare tips

A little care keeps the finish looking good. We recommend:

  • Don’t leave a fresh chip for long
  • Store metal items away from the bath
  • Put a towel in the bath if you are working above it
  • If an acrylic bath flexes, have its feet adjusted

Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.

Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.