Carmarthenshire · Wales
Bath Repair in Nantycaws
Bath repair across Nantycaws and nearby, done in a single visit in most cases.
- Repairs from £95
- Cracks in an acrylic bath
- Chips under the taps
Prices and what affects them
Repairs from £95. You will know the full cost before you book. We take into account:
- The size and number of damaged areas
- How easy the damage is to reach
- The material and finish
- Whether we combine several jobs
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
- One sharp close-up of the damage
- The material, if you know it
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
How we handle bath repair in Nantycaws
Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all repaired in place, normally in one visit. Whether it’s deep scratches in acrylic and rust by the waste and overflow, we can typically put it right.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Nantycaws (SA32)
- Region
- Carmarthenshire
- Warranty
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Nantycaws
Also in Nantycaws
Nantycaws questions
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Nantycaws.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Do you cover Nantycaws?
Yes. We cover the whole UK and come to Nantycaws and the rest of Carmarthenshire. Send us photos for a fixed quote, or call 0345 017 0787.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
How the visit works
We work cleanly and quietly. Protection goes down first, then the work takes a morning or an afternoon. Before we leave, we explain the curing time and the aftercare.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
Advice
About Nantycaws
Nantycaws is about 3 miles east of Carmarthen, in Carmarthenshire. From the centre of Nantycaws to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Nantycaws is one of 195 places in Carmarthenshire where we work.
Every address in SA32 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Capel Dewi (2 miles north-west), Llangunnor (2 miles north-west), Cwmffrwd (2 miles west), Tregynnwr (2 miles west) and Abergwili (2 miles north-west). We also work in nearby towns such as Llanelli (12 miles south), Carmarthen (3 miles west), Llanelli Rural (12 miles south), Bigyn (12 miles south), Wern (12 miles south) and Ammanford (11 miles east).
Local landmarks in Nantycaws
For rail, the closest station is Carmarthen station, roughly 2.9 miles west of the centre. Other landmarks nearby include Carmarthen Town Museum (2.9 miles north-west) and Banc y Betws (1.8 miles south). Open spaces near Nantycaws include Llwynmelyn.
Honest limits
Before you book, it’s worth knowing the limits:
- Cracks in parts of an acrylic bath we cannot get to from below
- A bath that moves underfoot, until its support is fixed
- A steel bath rusted through
Send us photos and we will tell you honestly.
What we work on
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Landlords, agents and businesses in Nantycaws
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we will handle the rest.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Keeping it looking good
It’s all simple stuff:
- Do not scrub with anything abrasive
- Stick to mild cleaners and a soft cloth
- Ensure an acrylic bath is firm underfoot
- Get a dripping tap fixed promptly
Care for the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Signs you need bath repair in Nantycaws
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Most people contact us when they notice something like this:
- A chip where the taps sit
- Chips along the edge of the bath
- Rust spots around the plughole
- Cracks in an acrylic bath
Before you book anyone
- Whether a trained technician does the job
- How the room is protected while they work
- Aftercare advice
- The length of the guarantee and what it covers
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, just like other baths.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
