Worcestershire · England
Bath Repair for Napleton homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Napleton, carried out at your home and guaranteed for a year.
- Repairs from £95
- Rusty patches near the plughole
- Damage beneath the taps
What bath repair costs
Repairs from £95. You will know the full cost before you book. We look at:
- The size and number of damaged areas
- The type of damage
- The colour and finish to match
- Access to the area
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- The material, if you know it
- A coin beside the damage so we can judge size
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Bath repair in Napleton, done in place
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in one visit. We regularly repair acrylic, pressed steel enamel and whirlpool & spa baths, and the jobs we see most are damage beneath the taps and scuffs and scratches in the surface.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Napleton (WR5)
- County
- Worcestershire
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Napleton
More services for Napleton
The process
The work is clean and fairly quiet, so you can carry on at home. Protection goes down first, then the work takes a few hours. Before we leave, we explain how soon it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Preparing for the visit
- Let us know which floor the room is on
- Open a window if you can
- Tell us about parking, stairs or access
How to get a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Signs you need bath repair in Napleton
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Get in touch if you’ve noticed:
- A chipped rim or side
- Rust spots around the plughole
- Chips caused by builders
- A hole punched through by something heavy
What to look for in a quote
- How soon you can use it again
- Whether they match the colour on site
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Your questions about bath repair in Napleton
Can you repair something that is been repaired before?
Usually, yes. The old repair comes out first, so mention it when you send photos.
Do you cover Napleton?
Yes. We work across the UK and come to Napleton. Send us pictures for a fixed quote, or call 0345 017 0787.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
How much does bath repair cost in Napleton?
Prices start from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures can’t show what we need.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
How to look after the repair
Aftercare is simple:
- Don’t scrub with anything abrasive
- Have new chips seen to early
- Rinse the bath after use, especially in hard water areas
- Put a towel in the bath if you’re working above it
There is nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.
About Napleton
Napleton is about 4 miles south of Worcester, in Worcestershire. Jobs in Napleton are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We work in 376 places in Worcestershire. We work right across the region, from Napleton to Birmingham (27 miles away).
Jobs in WR5 are booked in the same way as anywhere else. Close by, we cover Draycott (1 mile west), Kempsey (1 mile north-west), Baynhall (1 mile south-west), Brook End (1 mile north) and Callow End (2 miles north-west). Larger places within reach include Worcester (4 miles north), Bromsgrove (15 miles north-east), Great Malvern (5 miles west), Droitwich Spa (9 miles north), Evesham (12 miles east) and Stourport-on-Severn (15 miles north).
Local landmarks in Napleton
We visit homes around Kempsey Primary School, The Gurkha Knight pub and Kerswell Green Church, among other places. For rail, the closest station is Worcestershire Parkway station, about 2.5 miles north-east of the centre. Nearby you’ll also find Museum of Royal Worcester (3.9 miles north) and Worcester Castle (3.8 miles north). For a walk, there is Tiddesley Wood.
Repairing versus replacing in Napleton
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Our bath repair starts from £95. A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.
Why book with us
- Nothing taken out or refitted
- We come to you, anywhere in the UK
- No extra charge for your area
- One visit for most repairs
See our prices page and guide to resurfacing and replacement costs.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- A bath that moves underfoot, until its support is fixed
- A bath worn all over, where resurfacing makes more sense
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send photos and we will say what we think.
Materials we work on in Napleton
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
- Cast iron enamel
About our accreditations · Every repair comes with a one-year guarantee.
