Milton Keynes · England
Bath chip & crack repair in Nash, Milton Keynes
Local bath repair for Nash: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- Rust spots around the plughole
- Snagging damage from a refit
Bath repair at your home in Nash
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, generally in a single visit. If you’re dealing with a chip where the taps sit and damage done while the bathroom was being fitted, we can generally put it right, whatever the material.
You get a one-year guarantee, the same in Nash as everywhere else we work.
- Location
- Nash (MK17)
- Area hub
- Milton Keynes
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Why repair rather than replace?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. A repair typically costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- Colour-matched on site
- We come to you, anywhere in the UK
Read our full price list or bath cost comparison.
Landlords, agents and businesses in Nash
Housing associations and facilities teams use us for planned and reactive repairs in Milton Keynes and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
About Nash
Nash is about 5 miles south-west of Milton Keynes, in Milton Keynes. Customers in Nash get the same service as everywhere else we cover: a fixed quote from your photos, and a technician at your door on the day. Our repair technicians cover 73 places across Milton Keynes. You can also see our page for London, about 48 miles away.
Postcode districts we cover here: MK17. Local streets include High Street, Thornborough Road and Winslow Road, and we cover them all. Other places close to Nash include Whaddon (2 miles east), Great Horwood (2 miles south), Little Horwood (2 miles south), Winslow (4 miles south) and Mursley (4 miles south-east). Within a short drive, we also cover Milton Keynes (5 miles north-east), Bletchley (5 miles east), Newport Pagnell (8 miles north-east), Bletchley and Fenny Stratford (6 miles east), Furzton (4 miles east) and Whitehouse (3 miles north-east).
Around Nash
Around Nash, we work in homes near Church of All Saints. Nash’s nearest station is Milton Keynes Central station, about 4.5 miles north-east of the centre. Further afield, we also cover the area around Bletchley Community Hospital (4.9 miles east) and Hangmans Hill (4.3 miles south-east). The countryside around Nash includes Lodge Lake.
How we price bath repair
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- The colour and finish to match
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- How much damage there is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- A close-up of the damage, in focus
- A wider photo showing the entire bath
- Daylight if possible, and no flash reflection
- The material, if you know it
Upload a photo of the damage and one of the whole item, and tell us you’re in Nash, and we will reply with a fixed price.
Honest limits
To be straight with you, there are a few things a repair won’t fix:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
How the visit works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes two to three hours for most chips. We clean up when we are done and tell you when it’s ready to use.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Before we arrive
- Let us know which floor the room is on
- Make sure the room can be ventilated
- Keep pets and children out of the room while we work
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price without visiting.
Advice
Nash questions
Do you cover Nash?
Yes, we do. We send a technician to Nash for every job, and the price is the same as everywhere else.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Can you redo an old repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
What happens after I send pictures?
We come back with a fixed price. There is no obligation to book.
Is my repair covered?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
What does bath repair cost?
Repairs from £95. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your MK17 postcode.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
What else we do in Nash
How to care for the repair
It’s all simple stuff, just a few sensible habits:
- Give the bath a quick rinse after use
- Have new chips seen to early
- Store metal items away from the bath
- Make sure an acrylic bath is firm underfoot
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
About our accreditations · Every repair comes with a one-year guarantee.
