East Ayrshire · Scotland
Bath Repair for New Cumnock homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in New Cumnock. Free, fixed quotes from your photos.
- Repairs from £95
- Cracks in an acrylic bath
- Scuffs and scratches in the surface

Bath repair in New Cumnock, done in place
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Typical jobs include hairline or through cracks in acrylic and chips under the taps, across cast iron enamel, roll-top & freestanding and whirlpool & spa baths.
A one-year guarantee comes as standard, so you’re not left on your own once we have gone.

- Where
- New Cumnock (KA18)
- County
- East Ayrshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Where we work around New Cumnock
New Cumnock is about 18 miles east of Ayr, in East Ayrshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. New Cumnock is one of 53 places in East Ayrshire we cover. Our jobs stretch from New Cumnock to Glasgow (about 32 miles away).
Postcode districts we cover here: KA18. We regularly work on streets such as Dalhanna Drive, Redree Place and Loch Browan Crescent and the roads around them. With the A76 and B741 close by, New Cumnock is simple for us to get to. We also travel to Mansfield (1 mile north), Pathhead (1 mile north), Bankglen (1 mile west), Craigens (4 miles north-west) and Netherthird (5 miles north-west). Further out, we also cover Cumnock (5 miles north-west), Mauchline (12 miles north-west), Auchinleck (7 miles north-west), Catrine (10 miles north-west), Muirkirk (10 miles north-east) and Tarbolton (15 miles north-west).
Landmarks near New Cumnock
In New Cumnock, that means homes near Martyrs Parish Church, among other places. The nearest railway station is New Cumnock station, about 0.7 miles north of the centre. Other landmarks nearby include Cumnock Castle (0.5 miles north) and East Ayrshire Community Hospital (5.5 miles north-west). Open spaces near New Cumnock include Blackcraig Hill and Loch o' th' Lowes.
Prices and what affects them
Prices start from £95. You’ll know the full cost before you book. We look at:
- The material
- How many items we do on one visit
- Access to the area
- Unusual colours or finishes
We charge the same wherever you are, with no extra for New Cumnock. What changes the price is the job itself: the material, the amount of damage and how many items.
How to get a fixed quote
Good photos mean an accurate price. Here’s what we find most useful:
- Natural light rather than flash
- One picture of the entire bath
- The postcode, so we can plan the visit
- Any details about the material
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which generally takes a morning or an afternoon. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Related advice
Repair or replace in New Cumnock?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Nothing taken out or refitted
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before booking
See our full price list or resurfacing vs replacement cost guide.
Materials and what they mean for the repair
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Aftercare tips
Once the work has cured, treat it gently:
- Rinse the bath after use, especially in hard water areas
- Get a dripping tap fixed promptly
- Keep abrasive pads and gritty cleaners away from the bath
- Store metal items away from the bath
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.
If water is getting through a crack, stop using the bath. Leaks under a bath can damage floors and ceilings.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
When we’d advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we cannot get to from below
Send us pictures and we will tell you honestly before booking.
Materials we work on in New Cumnock
- Acrylic
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
Also in New Cumnock
What we are called out for in New Cumnock
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
People typically call us when they notice one of these:
- Damage done while the bathroom was being fitted
- A failed DIY repair that is discoloured or lifting
- A hole punched through by something heavy
- A chip where the taps sit
What to look for in a quote
- Aftercare advice
- The length of the guarantee and what it covers
- How the room is protected while they work
- What prep work is covered
New Cumnock questions
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
How long before I can use the bath?
Usually the next day. We confirm the time before we leave.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Do you work in New Cumnock?
Yes. We cover the whole UK and come to New Cumnock and the rest of East Ayrshire. Send us photos for a fixed quote, or call 0345 017 0787.
What areas do you cover?
The whole UK, including all of East Ayrshire. Just include your postcode and we’ll confirm dates.
Can a cracked acrylic bath be fixed?
Generally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
About our accreditations · Every repair comes with a one-year guarantee.

