Wakefield · England
Bath Repair in New Fryston
Our repair technicians come to New Fryston for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Damage beneath the taps
- A hole punched through by something heavy
About our bath repair in New Fryston
A damaged bath doesn’t have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site so the repair is hard to spot. Our technicians work on whirlpool & spa baths, cast iron enamel and roll-top & freestanding, and common reasons people get in touch are a cracked acrylic bath and a chipped rim or side.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- New Fryston (WF10, WF11)
- County
- Wakefield
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Prices start from £95. We charge the same wherever you are, so there is no premium for New Fryston. The job itself decides the price: the material, the amount of damage and how many items.
What you get with us
- Free fixed quotes from pictures
- No extra charge for your area
- No need to remove anything
- Honest advice, even when it means no job
Read our prices page or guide to resurfacing and replacement costs.
When we’d advise against a repair
Before you book, it’s worth knowing the limits:
- A bath that moves underfoot, until its support is fixed
- Acrylic cracks with no access behind them
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
Places near New Fryston
More services for New Fryston
Looking after it afterwards
Most damage we see is avoidable. A few tips:
- Get any new chip repaired before it rusts
- Check that an acrylic bath doesn’t move when you stand in it
- Rinse the bath after use, especially in hard water areas
- Fix dripping taps early to stop staining and limescale
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
Covering New Fryston
New Fryston is about 2 miles north-east of Castleford, in Wakefield. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover all 101 towns and villages in Wakefield. We work right across the region, from New Fryston to Leeds (about 11 miles away).
Every address in WF10 and WF11 is covered. Whether you live on Mapplewell Road, Netherwood Avenue and Swift Way or a nearby road, we can come to you. Neighbouring places we cover include Newton (1 mile north-west), Ferry Fryston (1 mile south), Airedale (1 mile south), Ledston (2 miles north-west) and Ledsham (2 miles north). Larger places within reach include Wakefield (8 miles south-west), Pontefract (3 miles south), Ossett (12 miles west), Normanton (5 miles south-west), South Kirkby and Moorthorpe (10 miles south) and South Elmsall (10 miles south).
Near you in New Fryston
Around New Fryston, we work in homes near The Holy Cross, The Magnet pub and Oyster Park Primary Academy, among other places. The nearest railway station is Castleford station, roughly 2 miles south-west of the centre. Other landmarks nearby include Castleford Museum (1.7 miles south-west) and Castleford (2.7 miles south-west). Open spaces near New Fryston include Fairburn Ings RSPB reserve and Lemonroyd Lake.
- Local facilities include Municipal Borough of Castleford (1.9 miles south-west)
What we do, step by step
Visits start with a quick look at the job together, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. Allow a morning or an afternoon.
- We clean the area and remove any loose enamel or rust.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, typically by the day after, the bath is ready to use.
Getting ready for the visit
- Clear the area around the damage
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
Common questions in New Fryston
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
How much does bath repair cost in New Fryston?
Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
What happens once I’ve sent photos?
You’ll get a fixed quote back, plus dates. You are under no obligation.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
Different materials, different repairs
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Send the address, photos and access details.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Prices and what affects them
Prices start from £95. We give every job a fixed price from photos. This is what makes a difference:
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- Unusual colours or finishes
- The type of damage
We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
The better the pictures, the more accurate the price. Here’s what helps:
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- Your postcode, so we can check dates
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
