Hampshire · England
Bath chip & crack repair in New Milton, Hampshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in New Milton. Send pictures for a free, fixed quote.
- Repairs from £95
- Cracks in an acrylic bath
- A chip where the taps sit
Bath repair in New Milton without replacing anything
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, generally in a single visit. We regularly repair acrylic, pressed steel enamel and whirlpool & spa baths, and people most frequently call us about scuffs and scratches in the surface and a hole punched through by something heavy.
Your repair is guaranteed for a year, as with every job we do.
- Location
- New Milton (BH25)
- County
- Hampshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Flexing caused by a failed cradle or loose feet
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
New Milton and the surrounding area
New Milton is about 4 miles east of Christchurch, in Hampshire. Jobs in New Milton are booked in like any other job: a fixed quote from pictures, then a visit to do the work. New Milton is one of 683 towns and villages in Hampshire where we work.
Our technicians cover all of the BH25 postcode area and the streets around it. You will find streets such as Station Road, Worthy Road and Whitefield Road. Main roads around New Milton include the A337 and B3055, so getting to you is simple. We also travel to Ashley (1 mile north-east), Barton on Sea (1 mile south), Bashley (1 mile north), Walkford (1 mile west) and Ossemsley (2 miles north). Within a short drive, we also cover Totton (13 miles north-east), Lymington (5 miles east), Hythe (13 miles north-east), Ringwood (8 miles north-west), Dibden Purlieu (13 miles north-east) and Marchwood (13 miles north-east).
What’s near New Milton
Our customers here include homes close to The Arnewood School, New Milton Junior School and The Arnewood School and the streets around them. Other local landmarks include Parish Church of St Magdalene (0.5 miles south-west) and The George Centre pub (0.5 miles south). There’s a railway station in New Milton itself: New Milton station. Other landmarks nearby include Highcliffe Castle (2.7 miles south-west) and Sammy Miller Motorcycle Museum (1 mile north-west). Not far away are Milford on Sea LNR.
Your questions about bath repair in New Milton
What areas do you cover?
Across the UK. Our prices are the same everywhere.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
When can I have a bath again?
Normally by the following day, though it depends on what we’ve done.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Is my repair covered?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Is a bath repair permanent?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in New Milton.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What happens on the day
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a few hours, depending on the damage for most jobs. We leave the room clean.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Mention any parking restrictions or tricky access
- Keep children and pets away from the room on the day
- Let us know if it has been repaired before
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Advice
Nearby places to New Milton
What else we do in New Milton
Landlord and trade work in New Milton
We’re used to working with agents and managing companies. Send the address, pictures and access details.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Keeping it looking good
Once the work has cured, treat it gently:
- Cover the bath during DIY or decorating
- Give the bath a quick rinse after use
- Get a dripping tap fixed promptly
- Clean with warm water and a mild detergent
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Repairs from £95, with every job priced individually. We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Free fixed quotes from pictures
- One visit for most repairs
- Everything repaired in place
- A year’s guarantee on all work
Take a look at our prices page and resurfacing vs replacement cost guide.
Prices and what affects them
Prices start from £95. You will know the full cost before booking. We take into account:
- How easy the damage is to reach
- The type of damage
- How many items we do on one visit
- Any earlier repairs that need removing first
We charge the same wherever you are, with no extra for New Milton. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
Two or three clear pictures are generally enough. Try to include:
- Where you are, by postcode
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- Something in shot to show the size
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
