Hampshire · England
Bath Repair in Ringwood
Damaged bath in Ringwood? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Chips on the rim or sides
- Snagging damage from a refit
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes two to three hours for most chips. We tidy up before we leave and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the following day.
How to prepare
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
Advice
About our bath repair in Ringwood
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on pressed steel enamel, cast iron enamel and roll-top & freestanding, and common reasons people contact us are chips under the taps and cracks in an acrylic bath.
Big or small, you get the same one-year guarantee in Ringwood and across Hampshire.
- Area
- Ringwood (BH24)
- County
- Hampshire
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Landlord and trade work in Ringwood
We work for landlords, letting agents and housing providers in Ringwood as well as householders. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
Common questions in Ringwood
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What areas do you cover?
Across the UK, and that includes Ringwood. Our prices are the same everywhere.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
Is a cracked acrylic bath repairable?
Frequently, yes, if we can reach the underside to reinforce it. Take off the bath panel and check, or send us a picture.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
How do I book?
Send pictures through the quote form or call 0345 017 0787.
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Ringwood. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Ringwood customers choose us
- A year’s guarantee on all work
- Colour-matched on site
- Technicians who travel to you, UK-wide
- Rooms protected and left tidy
Read our prices page or guide to resurfacing and replacement costs.
Honest limits
To be straight with you, some problems need a different fix:
- Water coming from the waste or taps rather than the bath
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Ringwood
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
Looking after it afterwards
Aftercare is simple, and it makes a real difference:
- Avoid scourers, wire wool and gritty cream cleaners
- Don’t leave razors or cans standing in the bath
- Do not leave a fresh chip for long
- Protect the bath with a towel when doing jobs nearby
Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Common problems we fix in Ringwood
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
Common reasons people in Ringwood contact us are:
- Rusty patches near the plughole
- A failed DIY repair that is discoloured or lifting
- Deep scratches in acrylic
- A hole punched through by something heavy
Before booking anyone
- How changes to the job are handled
- Whether cleaning and preparation are in the price
- A fixed quote, and whether VAT is included
- Whether the colour is mixed to match
Our work in Ringwood
Ringwood is about 7 miles north of Christchurch, in Hampshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 683 places across Hampshire.
Our visits in BH24 work the same way as everywhere else we cover. From Addison Square, High Street and Market Place or a nearby road, a technician can come to you. Being close to the A31 and A338, Ringwood is easy for our repair technicians to reach. We also cover the places around Ringwood: Poulner (1 mile north-east), Hightown (1 mile south-east), Upper Kingston (1 mile south), Blashford (1 mile north) and Crow (1 mile south-east). Within a short drive, we also cover Totton (13 miles east), Lymington (12 miles south-east), New Milton (8 miles south-east), Barton on Sea (9 miles south-east), Marchwood (15 miles east) and Ashley (8 miles south-east).
Local landmarks in Ringwood
Typical jobs here are in homes near The Lamb Inn, Ringwood Church of England Infant School and Ringwood Waldorf School. You will also find Avon Heath Country Park (2 miles south-west), Ringwood School (less than half a mile north-west) and Trinity Congregational Church (within half a mile south-west). Nearby you will also find St Leonard's Hospital (3.9 miles south-west). Open spaces near Ringwood include Blashford Lakes and Linbrook Lake.
Nearby places to Ringwood
More services for Ringwood
About our accreditations · Every repair comes with a one-year guarantee.
