North Lanarkshire · Scotland
Bath Repair for Newarthill homes
Bath repair for Newarthill, without a refit. Get a fixed price from your photos, then book a visit.
- Repairs from £95
- Scratches you can feel with a fingernail
- Rust by the waste and overflow
Bath repair in Newarthill, done in place
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. We work on whirlpool & spa baths, pressed steel enamel and acrylic, and the jobs we see most are chips along the edge of the bath and hairline or through cracks in acrylic.
A one-year guarantee comes as standard.
- Location
- Newarthill (ML1)
- County
- North Lanarkshire
- Cover
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
So the finish stays in good condition:
- If an acrylic bath flexes, have its feet adjusted
- Don’t leave a fresh chip for long
- Give the bath a quick rinse after use
- Avoid scourers, wire wool and gritty cream cleaners
A repaired bath needs no special treatment, beyond gentle cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.
Towns and villages near Newarthill
Other services in Newarthill
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Newarthill. The price reflects:
- The material
- How much damage there is
- The type of damage
- The colour and finish to match
A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your pictures
You can typically get a fixed quote without us visiting. To make it quick:
- One picture of the entire bath
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
- Details of any past repairs
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Repairing versus replacing in Newarthill
Swapping a damaged bath for a new one normally means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why book with us
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- No extra charge for your area
- We will tell you if it’s not worth repairing
Read our pricing or resurfacing vs replacement cost guide.
The process
The work is clean and fairly quiet. We protect the area first, then the work takes a morning or an afternoon. Before we leave, we explain how soon it can be used and how to look after it.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the following day, the bath is ready to use.
Before we arrive
- Make sure the room can be ventilated
- Point us to the nearest place to park
- Let us know if it has been repaired before
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Related advice
Newarthill and the surrounding area
Newarthill is about 2 miles north-east of Motherwell, in North Lanarkshire. Our repair technicians come to clients in Newarthill, so there is no workshop to go to. Newarthill is one of 89 places in North Lanarkshire we cover. You can also see our page for Glasgow, about 13 miles away.
Our technicians cover all of ML1. That includes homes on High Street, Muirhead Drive and Greenside Street and the roads around them. We also cover the places around Newarthill: Biggar Road (1 mile south-east), Holytown (1 mile west), Cleland (1 mile south-east), Hareshaw (1 mile north-east) and Carfin (2 miles south-west). Within a short drive, we also cover Cumbernauld (9 miles north), Coatbridge (4 miles north-west), Airdrie (4 miles north-west), Wishaw (3 miles south), Bellshill (3 miles west) and Kilsyth (12 miles north-west).
Landmarks near Newarthill
Typical jobs here are in homes near Newarthill and Brannock High School, among other places. The closest station to Newarthill is Carfin station, about 1 mile south-west. Further afield, we also cover the area around North Lanarkshire Heritage Centre (2.9 miles south-west) and Cleland Hospital (1.5 miles south-east). Green spaces nearby include Allanton House lake and Baron's Haugh RSPB Reserve.
Common questions in Newarthill
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Are there extra charges for Newarthill?
We don’t add a call-out fee. The fixed price covers the visit and the work.
Is a bath repair permanent?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Can you redo an old repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do the materials smell?
There can be some smell while we work. It clears as the materials cure.
Honest limits
A few problems are outside what a surface repair can do:
- Wear across the whole surface, which needs re-enamelling
- A steel bath rusted through
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so repair chips early.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
