Leicester · England
Bath Repair in Newfoundpool
Damaged bath in Newfoundpool? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Rusty patches near the plughole
Bath repair in Newfoundpool without replacing anything
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, normally in a single visit. Common call-outs are for chips on the rim or sides and cracks in an acrylic bath, across cast iron enamel, whirlpool & spa baths and pressed steel enamel.
A one-year guarantee comes as standard.
- Where
- Newfoundpool (LE3, LE4, LE1)
- Area hub
- Leicester
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- How many items we do on one visit
- The material and finish
- Access to the area
- How much damage there is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Send pictures for a quote
You can take the photos on your phone. Just make sure we can see:
- Any details about the material
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Also near Newfoundpool
What else we do in Newfoundpool
Common problems we fix in Newfoundpool
A cracked acrylic bath typically wasn’t supported properly. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
Customers generally contact us about:
- Chips on the rim or sides
- Deep scratches in acrylic
- Damage beneath the taps
- Chips caused by builders
Comparing quotes
- The length of the guarantee and what it covers
- Whether the price covers travel
- What preparation is included
- What aftercare is recommended
Your questions about bath repair in Newfoundpool
How soon can you come?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
How do I book?
Use the quote form or ring 0345 017 0787.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Is a cracked acrylic bath repairable?
Typically, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a few hours. The room is left tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the day after.
Preparing for the visit
- Keep pets and children out of the room while we work
- Point us to the nearest place to park
- Open a window if you can
Ask for a price
Most customers in Newfoundpool get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Newfoundpool and the surrounding area
Newfoundpool is about 1 mile west of Leicester, in Leicester. Book a date that suits you, and you’ll know when to expect us, so there is no waiting around. Newfoundpool is one of 35 towns and villages in Leicester where we work. Our jobs stretch from Newfoundpool to Birmingham (33 miles away).
Every address in LE3, LE4 and LE1 is within our area. Streets in the area include Mary Road, Pool Road and Joyce Road. Close by, we cover Dane Hills (1 mile west), Woodgate (1 mile north-east), Westcotes (1 mile south), New Parks (1 mile north-west) and Western Park (1 mile south-west). Within a short drive, we also cover Oadby (5 miles south-east), Leicester Forest East (3 miles south-west), Birstall (3 miles north), Stoneygate (3 miles south-east), Thurmaston (4 miles north-east) and Wigston Fields (4 miles south-east). Newfoundpool is one of the larger places we cover in Leicester.
Near you in Newfoundpool
Around Newfoundpool, we work in homes near Fosse Recreation Ground, English Martyrs' Catholic School and Cherryleas Assessment Centre and the streets around them. Other local landmarks include The High Cross pub (0.8 miles east), St Paul's Church (under half a mile south-east) and Inglehurst Infant School (within half a mile north-west). Newfoundpool’s nearest station is Leicester station, roughly 1.5 miles east. Other landmarks nearby include Jewry Wall Museum (0.7 miles south-east) and Kirby Muxloe Castle (3 miles west). Not far away are Sheet Hedges Wood and Old John.
- Other local spots include Latimer (1.9 miles east)
Aftercare tips
Once the work has cured, treat it gently:
- Do not scrub with anything abrasive
- Stick to mild cleaners and a soft cloth
- Fix dripping taps early to stop staining and limescale
- Check that an acrylic bath does not move when you stand in it
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
What we can’t put right
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Wear across the whole surface, which needs re-enamelling
- Flexing caused by a failed cradle or loose feet
- Cracks in parts of an acrylic bath we cannot get to from below
Send us photos and we will tell you honestly before booking.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
