East Riding of Yorkshire · England

Bath Repair for North Dalton homes

Bath repair in and around North Dalton: photo quotes, tidy work and a year’s guarantee.

  • Repairs from £95
  • Deep scratches in acrylic
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in North Dalton

What happens on the day

Nothing needs to be moved out of the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take a few hours, depending on the damage, and you are welcome to carry on with your day while we work.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. Finish coats go on, then the repair is polished to blend in.
  5. The repair is left to cure, and most baths can be used the following day.

Preparing for the visit

  • Ensure the area is dry
  • Let us know which floor the room is on
  • Keep children and pets away from the room on the day

Ask for a price

Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.

Get a fixed price

Advice

Bath repair in North Dalton without replacing anything

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Whether it’s a kit repair that didn’t last and chips on the rim or sides, we can help, whatever the material.

All our work comes with our one-year guarantee.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Area
North Dalton (YO25)
County
East Riding of Yorkshire
Warranty
One year on every repair
Quote
From £95. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

What bath repair costs

Prices start from £95. Every quote is fixed and free. What we take into account:

  • The material and finish
  • Any earlier repairs that need removing first
  • Doing more than one item at once
  • How many areas need work

No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

How to get a fixed quote

The better the photos, the more accurate the price. Here’s what we find most useful:

  • The postcode, so we can plan the visit
  • A clear, close picture of the problem area
  • Any earlier repairs or coatings
  • What it’s made of, if you know

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Should I try a DIY kit first?

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.

If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.

For landlords and businesses

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

What a repair cannot fix

A repair is not right for every job, for example:

  • Water coming from the waste or taps rather than the bath
  • Rust that has eaten right through a steel bath
  • A bath that flexes because its feet or cradle have failed (that needs fixing first)

Send us photos and we’ll tell you honestly.

Materials we work on in North Dalton

  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths

Materials and what they mean for the repair

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so repair chips early.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

What we’re called out for in North Dalton

Baths take more knocks than people expect: everyday items get dropped into it all the time, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

People usually call us when they notice something like this:

  • Cracks in an acrylic bath
  • Chips caused by builders
  • Holes from dropped items
  • A chip where the taps sit

Comparing quotes

  • What preparation is included
  • What happens if they find more damage
  • How soon you can use it again
  • Who turns up on the day

How to compare quotes

Questions from North Dalton

How much does bath repair cost in North Dalton?

Repairs from £95. We give a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item with your YO25 postcode.

Can you repair a failed DIY repair?

Regularly. We strip it out, deal with any rust and repair it again.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

Will the repair show?

We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.

Can you fix rust around the plughole?

Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.

How quickly can you book me in?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

Do you cover the whole of East Riding of Yorkshire?

We work UK-wide, and that includes North Dalton. Prices don’t change with location.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Repairing versus replacing in North Dalton

A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Why book with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • We leave the room as we found it
  • Colour mixed on the day to match
  • Repair technicians who travel to you, UK-wide

See our prices page or guide to resurfacing and replacement costs.

Covering North Dalton

North Dalton is about 7 miles south-west of Driffield, in East Riding of Yorkshire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Our technicians cover all 299 towns and villages in East Riding of Yorkshire. You can also see our page for Leeds, about 41 miles away.

Every address in YO25 is within our area, from the main roads to the quietest streets. Jobs here include addresses on Hill Crescent, South End and Welgarth. We also travel to Middleton-on-the-Wolds (2 miles south), Bainton (2 miles east), Tibthorpe (3 miles north-east), Lund (3 miles south-east) and Kirkburn (3 miles north-east). Further out, we also cover Beverley (10 miles south-east), Driffield (7 miles north-east), Pocklington (8 miles west), Cottingham (14 miles south-east), Market Weighton (8 miles south-west) and Willerby (15 miles south).

Around North Dalton

Our customers here include homes close to Church of All Saints and the streets around them.

Map of North Dalton © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.