East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in North Dalton, East Riding of Yorkshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in North Dalton. Free, fixed quotes from your photos.
- Resurfacing from £350
- A coating lifting around the plughole
- A roll-top that is seen better days
Bath re-enamelling in North Dalton, done in place
We do not move the bath, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. We are often asked to fix a period or roll-top bath worth keeping and a bath that stays dull however much you clean it, in cast iron baths, Victorian roll-tops and acrylic baths.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Location
- North Dalton (YO25)
- Area hub
- East Riding of Yorkshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in North Dalton
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Towns and villages near North Dalton
More services for North Dalton
North Dalton questions
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
How much does bath re-enamelling cost in North Dalton?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
What we are called out for in North Dalton
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Keep an eye out for these signs:
- A roll-top that is seen better days
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
- A coloured bath you want in white
Comparing quotes
- How the room is protected while they work
- How to look after the finish
- Whether a trained technician does the job
- If travel is included in the price
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- A bath split right through the body
Send us photos and we will tell you honestly.
Materials we repair
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
What affects the price in North Dalton
Prices start from £350. We charge the same across the UK, including North Dalton. What changes the price is:
- Doing more than one item at once
- How easy the damage is to reach
- Previous DIY repairs that have to come out
- The size and number of damaged areas
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- One sharp close-up of the damage
- A coin beside the damage so we can judge size
- Your postcode, so we can check dates
- Any earlier repairs or coatings
For a price in North Dalton, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Our work in North Dalton
North Dalton is about 7 miles south-west of Driffield, in East Riding of Yorkshire. From the centre of North Dalton to the outlying streets, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. North Dalton is one of 299 places in East Riding of Yorkshire we cover. You can also see our page for Leeds, about 41 miles away.
We work across YO25 and the streets around it. That includes homes on Hill Crescent, South End and Welgarth. Neighbouring places we cover include Middleton-on-the-Wolds (2 miles south), Bainton (2 miles east), Tibthorpe (3 miles north-east), Lund (3 miles south-east) and Kirkburn (3 miles north-east). Within a short drive, we also cover Beverley (10 miles south-east), Driffield (7 miles north-east), Pocklington (8 miles west), Cottingham (14 miles south-east), Market Weighton (8 miles south-west) and Willerby (15 miles south).
Local landmarks in North Dalton
Around North Dalton, we work in homes near Church of All Saints, among other places.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Get any chip repaired quickly
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.
How it works
The work is clean and fairly quiet. We protect the area first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the next day.
Preparing for the visit
- Make sure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Tell us about parking, stairs or access
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
