Oxfordshire · England

Bath Repair for North Moreton homes

Problem with your bath in North Moreton? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • Damage beneath the taps
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in North Moreton

Prices and what affects them

Prices start from £95. You will know the full cost before you book. We take into account:

  • The size and number of damaged areas
  • The material
  • The type of damage
  • Any earlier repairs that need removing first

Compared with replacing, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Getting a price from pictures

Phone photos are fine, there is no need for anything special. Just ensure we can see:

  • Any details about the material
  • A close-up of the damage, in focus
  • Daylight if possible, and no flash reflection
  • The postcode, so we can plan the visit

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed price, not an estimate.

Bath repair at your home in North Moreton

Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Our repair technicians work on roll-top & freestanding, pressed steel enamel and acrylic, and common reasons people get in touch are snagging damage from a refit and a hole punched through by something heavy.

All of our repairs are guaranteed for twelve months in North Moreton and everywhere else. We return to put right any problem with the work.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Where
North Moreton (OX11)
Region
Oxfordshire
Guarantee
A year, on every repair
Price
From £95. Free and fixed, from your pictures
Call
0345 017 0787
Page updated
23 October 2026

Your questions about bath repair in North Moreton

What happens after I send photos?

We come back with a fixed price. You’re under no obligation.

Can you repair several things at once?

Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.

Can you quote from photos?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

Can rust on a bath be repaired?

Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Will the repair show?

The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.

How much does bath repair cost in North Moreton?

Repairs from £95. We give a fixed price from your photos. Send a close-up and a picture of the entire item and your postcode.

Is a bath repair permanent?

Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.

Honest limits

In fairness, some problems need a different fix:

  • A bath that moves underfoot, until its support is fixed
  • Acrylic cracks with no access behind them
  • Metal that has corroded all the way through

Send us photos and we will tell you honestly.

Materials we repair

  • Pressed steel enamel
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding

Our work in North Moreton

North Moreton is about 2 miles east of Didcot, in Oxfordshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We cover 443 places in Oxfordshire. You can also see our page for London, about 48 miles away.

All of OX11 is within our area, from the main roads to the quietest streets. Local streets include High Street, Elm Road and Wallingford Road, all of which we cover. Other places close to North Moreton include Mackney (1 mile east), Brightwell-cum-Sotwell (2 miles north-east), Little Wittenham (2 miles north), Wallingford (3 miles east) and Shillingford (3 miles north-east). Further out, we also cover Oxford (10 miles north), Abingdon-on-Thames (6 miles north-west), Thame (14 miles north-east), Wantage (10 miles west), Henley-on-Thames (13 miles east) and Grove (10 miles west).

Landmarks near North Moreton

In North Moreton, that means homes near South Moreton Primary School, Bear at Home pub and St Birinus School. For rail, the closest station is Didcot Parkway station, roughly 2.3 miles west of the centre. A little further out are Brightwell Castle (1.3 miles north-east) and Pendon Museum (2.7 miles north-west). The countryside around North Moreton includes Mowbray Fields and Wittenham Clumps.

Map of North Moreton © OpenStreetMap contributors

Repair or replace: which is better?

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.

Why North Moreton customers choose us

  • Fixed prices from your photos
  • Every repair guaranteed for a year
  • We leave the room as we found it
  • CHAS, Constructionline and SafeContractor accredited

See our full price list or guide to resurfacing and replacement costs.

DIY repairs versus a professional job

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

What we do, step by step

A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Plan for a morning or an afternoon. Before leaving, we tell you how long to leave it and how to look after it.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the day after.

Preparing for the visit

  • Let us know which floor the room is on
  • Mention any parking restrictions or tricky access
  • Tell us about any previous repairs or coatings

Getting a price

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.

Get a fixed price

Read more

Do you need bath repair in North Moreton?

Rust usually starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

Keep an eye out for these signs:

  • Impact holes in acrylic
  • Snagging damage from a refit
  • Chips under the taps
  • Rusty patches near the plughole

Before booking anyone

  • How your room will be protected
  • Whether a trained technician does the job
  • What happens if the damage is worse than the photos show
  • The length of the guarantee and what it covers

10 questions to ask before you book

Keeping it looking good

Simple care helps the repair last. We recommend:

  • Don’t leave a fresh chip for long
  • Do not scrub with anything abrasive
  • Ensure an acrylic bath is firm underfoot
  • Cover the bath during DIY or decorating

Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.

If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.

Different materials, different repairs

Cast iron

Cast iron is heavy and rigid, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.