Hertfordshire · England
Bath Repair in Northaw
Our repair technicians come to Northaw for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Scuffs and scratches in the surface
What happens on the day
We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a few hours, depending on the damage, and we leave the room as we found it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the next day.
Before we arrive
- Keep a parking space free if you can
- Open a window if you can
- Let the surface dry out before the visit
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
Bath repair in Northaw, done in place
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. We work on cast iron enamel, acrylic and whirlpool & spa baths, and common reasons people contact us are rust by the waste and overflow and chips caused by builders.
Whatever the size of the job, you get the same one-year guarantee.
- Location
- Northaw (EN6)
- Region
- Hertfordshire
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Northaw
More services for Northaw
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour matched, just like other baths.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, especially around the waste, so repair chips early.
What we’re called out for in Northaw
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
Keep an eye out for these signs:
- Snagging damage from a refit
- Rusty patches near the plughole
- A failed DIY repair that’s discoloured or lifting
- Deep scratches in acrylic
Comparing quotes
- If travel is included in the price
- What the guarantee covers, and for how long
- What protection goes down before work starts
- How changes to the job are handled
Where we work around Northaw
Northaw is about 2 miles north-east of Potters Bar, in Hertfordshire. Anywhere in EN6, we carry out the work at your property. Our technicians cover all 381 towns and villages in Hertfordshire. You can also see our page for London, about 14 miles away.
Our visits in EN6 are booked in the same way as anywhere else. Streets in the area include Vineyards Road, Church Lane and Northaw Road West. We also travel to Cuffley (1 mile east), Brookmans Park (2 miles north-west), Newgate Street (2 miles north-east), Bell Bar (2 miles north-west) and Little Berkhamsted (3 miles north). Within a short drive, we also cover Watford (11 miles west), Hemel Hempstead (14 miles west), Stevenage (14 miles north), St Albans (8 miles west), Welwyn Garden City (7 miles north) and Harpenden (12 miles north-west).
Near you in Northaw
In Northaw, that means homes near Mount Grace School, Parish Church of St Thomas A Becket and Two Brewers Public House, among other places. The nearest railway station is Cuffley station, roughly 1.6 miles east of the centre. Other landmarks nearby include Potters Bar Museum (2.1 miles west) and Chase Farm Hospital (3.3 miles south-east). Green spaces nearby include Fir and Pond Woods.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Questions from Northaw
What do you need from me?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Is a cracked acrylic bath repairable?
Normally, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
Something went through my bath. Can it be fixed?
Frequently, if there’s access underneath. We back the hole, fill it and refinish the surface.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How long before I can use the bath?
Normally by the following day, depending on the repair.
Should you replace it?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. We charge the same wherever you are, with no extra for Northaw. The job itself decides the price: the material, the amount of damage and how many items.
Why book with us
- Honest advice, even when it means no job
- Every repair guaranteed for a year
- Same prices wherever you are
- Colour-matched on site
See our full price list or bath cost comparison.
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- Whether we combine several jobs
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- How many areas need work
A repair is priced on what needs doing, not where you live. You will see the full price before booking, with no extras added later.
How to get a fixed quote
It only takes a minute to photograph the damage. Please include:
- A coin beside the damage so we can judge size
- One picture of the entire bath
- Details of any past repairs
- Natural light rather than flash
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Hertfordshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
How to look after the repair
Once the work has cured, treat it gently:
- Clean with warm water and a mild detergent
- Do not scrub with anything abrasive
- Keep metal cans and razors off the surface
- Have new chips seen to early
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
About our accreditations · Every repair comes with a one-year guarantee.
