Hertfordshire · England

Bath Repair in St Albans

Damaged bath in St Albans? We repair it in place, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • A hole punched through by something heavy
  • A kit repair that didn’t last
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in St Albans

Repair or replace: which is better?

People frequently assume a cracked or chipped bath has to come out. Normally it doesn’t: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Prices start from £95. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

What you get with us

  • Colour-matched on site
  • We will tell you if it’s not worth repairing
  • One-year guarantee on every repair
  • One price list for the whole UK

See our pricing or bath cost comparison.

About our bath repair in St Albans

Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. We work on cast iron enamel, whirlpool & spa baths and acrylic, and common reasons people get in touch are rust spots around the plughole and a kit repair that didn’t last.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.

Area
St Albans (AL1, AL3, AL4)
Area hub
Hertfordshire
Cover
One year on every repair
Quote
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

FAQs for St Albans

How soon can you come?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

Is a cracked acrylic bath repairable?

Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.

Is a holed acrylic bath repairable?

Frequently, if there is access underneath. The hole is backed, filled and refinished to match.

Are you accredited?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you repair coloured baths?

Yes. We mix the colour on the day to match, including older coloured suites.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Can you redo an old repair?

Yes. We remove the old filler and start again. Tell us about it when you send pictures.

Do you charge for travel?

Travel is included in the price, and we charge the same wherever you are.

Common problems we fix in St Albans

The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.

It’s worth getting a quote if you see:

  • A chipped rim or side
  • Hairline or through cracks in acrylic
  • Chips under the taps
  • Rust spots around the plughole

What to look for in a quote

  • Whether there are any call-out or travel charges
  • Whether the colour is mixed to match
  • How to care for the finish
  • How your room will be protected

Choosing a repair company

Our work in St Albans

St Albans is about 20 miles north-west of London, in Hertfordshire. Clients in St Albans get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. St Albans is one of 381 towns and villages in Hertfordshire where we work. You can also see our page for London, about 20 miles away.

Our visits in AL1, AL3 and AL4 work the same way as everywhere else we cover. You’ll find streets such as Gabriel Square, Jubilee Square and Old London Road. St Albans is on the A414 and B651, so it’s easy for us to reach. We also cover the places around St Albans: Bernards Heath (1 mile north), Sopwell (1 mile south), St Stephens (1 mile south-west), Marshalswick (1 mile north-east) and Park Street (2 miles south). We also work in nearby towns such as Watford (7 miles south-west), Hemel Hempstead (6 miles west), Stevenage (13 miles north-east), Welwyn Garden City (7 miles north-east), Harpenden (5 miles north) and Hitchin (14 miles north). Being one of Hertfordshire’s larger places, St Albans is somewhere we visit frequently.

Landmarks near St Albans

We visit homes around The Horn pub, Alban City School and Verulam School. Also close by are Church of St. Peter (less than half a mile north-west), Loreto College (within half a mile north) and Clarence Park (under half a mile east). St Albans has its own railway station: St Albans station. A little further out are St Albans Musical Museum (0.5 miles north-east) and The Maltings (under half a mile west). For a walk, there’s The Wick Local Nature Reserve and Verulamium Lake.

Map of St Albans © OpenStreetMap contributors

DIY kit or professional repair?

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Honest limits

It helps to know what we cannot do too:

  • A whole bath that is dull or worn, where a full re-enamel is the better fix
  • A steel bath rusted through
  • Water coming from the waste or taps rather than the bath

If in doubt, send pictures and we will say what we think.

Surfaces we repair

  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths
  • Pressed steel enamel
  • Acrylic

Materials and what they mean for the repair

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Composite and resin

Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, in much the same way.

Looking after it afterwards

Looking after the surface is easy, and it makes a real difference:

  • Store metal items away from the bath
  • A dripping tap stains enamel, so fix it early
  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Ensure an acrylic bath is firm underfoot

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.

Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

What affects the price in St Albans

Repairs from £95. A fixed quote means you know the cost before you book. We take into account:

  • The material
  • The colour and finish to match
  • The size and number of damaged areas
  • Whether it’s a chip, crack, burn or wear

A repair typically costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.

How to get a fixed price

A couple of clear pictures is all it takes. It helps if you send:

  • Your postcode, so we can check dates
  • Something in shot to show the size
  • Whether it’s been repaired or coated before
  • A close-up of the damage, in focus

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.

How the visit works

We begin by going over the job with you. Then the area is sheeted and masked and we start. It normally takes a morning or an afternoon, and we’ll tell you if anything changes.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, usually the following day.

Preparing for the visit

  • Have a window or extractor fan available
  • Let the surface dry out before the visit
  • Mention if the room is upstairs or in a flat

Getting a price

There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a fixed price

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.