Lincolnshire · England
Bath chip & crack repair in Northorpe, Lincolnshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Northorpe and across Lincolnshire. Send photos for a free, fixed quote.
- Repairs from £95
- Chips along the edge of the bath
- Impact holes in acrylic
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Bath repair at your home in Northorpe
It pays to repair bath damage while it’s small. On steel and cast iron, exposed metal starts to rust, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. If you are dealing with a chip where the taps sit and impact holes in acrylic, we can help.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Northorpe (DN21)
- County
- Lincolnshire
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Northorpe and nearby
Northorpe is about 6 miles south of Bottesford, in Lincolnshire. Jobs in Northorpe are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. We work in 732 places in Lincolnshire. You can also see our page for Leeds, about 44 miles away.
Jobs in DN21 work the same way as everywhere else we cover. Streets in the area include Manor Road and Monson Road, all of which we cover. We also travel to Scotton (1 mile north), Scotter (2 miles north), Kirton in Lindsey (3 miles east), Pilham (3 miles south-west) and Grayingham (3 miles east). Larger places within reach include Gainsborough (6 miles south-west), Market Rasen (14 miles east), Welton (13 miles south-east), Nettleham (15 miles south-east), Saxilby (13 miles south) and Caistor (14 miles east).
Around Northorpe
Our customers here include homes close to Church of St John the Baptist. The nearest railway station is Kirton Lindsey station, roughly 2.9 miles north-east.
How the visit works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Let us know if it has been repaired before
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Related advice
Aftercare tips
How the surface is treated afterwards matters:
- A dripping tap stains enamel, so fix it early
- Get any new chip repaired before it rusts
- Rinse the bath after use, especially in hard water areas
- Use a soft cloth and washing-up liquid for everyday cleaning
Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Why repair rather than replace?
Replacing a fitted bath normally involves a plumber, lifting out the old bath, re-tiling and a new panel and getting rid of the old bath. Repairing it fixes just the damaged area in a single visit. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Why book with us
- A fixed quote before you book
- Colour-matched on site
- We leave the room as we found it
- Work done at your home or business
Take a look at our pricing or guide to resurfacing and replacement costs.
What a repair cannot fix
Some problems need a builder, plumber or fitter rather than us:
- Wear across the whole surface, which needs re-enamelling
- Metal that has corroded all the way through
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
Northorpe questions
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens once I’ve sent photos?
We look at the pictures and reply with a fixed quote and some dates. If we need another angle, we will ask.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and you will get one combined price.
Do you work in Northorpe?
Yes, we do. We send a technician to Northorpe for every job, with no extra charge for travel.
Do you work for landlords and businesses?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Nearby places to Northorpe
More services for Northorpe
Signs you need bath repair in Northorpe
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
You may need us if you’ve spotted:
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
- Impact holes in acrylic
- Damage done while the bathroom was being fitted
What your quote should include
- If travel is included in the price
- Whether cleaning and preparation are in the price
- How the colour is matched
- Is the price fixed, and does it include VAT?
What affects the price in Northorpe
Prices start from £95. You won’t pay by the hour. The price depends on:
- What kind of damage it is
- How easy the damage is to reach
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
The price reflects the work involved, not your postcode. The full price is agreed before you book.
Quotes from your pictures
Two or three clear photos are generally enough. Try to include:
- A wider photo showing the entire bath
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- Something in shot to show the size
To get a price, send two or three photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
