Worcestershire · England
Bath chip & crack repair in Norton, Worcestershire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Norton, with a one-year guarantee on every repair.
- Repairs from £95
- Holes from dropped items
- Deep scratches in acrylic
Bath repair in Norton without replacing anything
Most of our bath repairs take a few hours, and the bath is back in use the next day. You will not need a plumber or tiler, because nothing is disconnected. We regularly repair acrylic, cast iron enamel and roll-top & freestanding, and the jobs we see most are deep scratches in acrylic and damage done while the bathroom was being fitted.
You get a one-year guarantee, the same in Norton as everywhere else we work.
- Area
- Norton (WR11)
- Region
- Worcestershire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Store metal items away from the bath
- Cover the bath during DIY or decorating
- Get any new chip repaired before it rusts
- A dripping tap stains enamel, so fix it early
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Landlord and trade work in Norton
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Do you need bath repair in Norton?
Nearly all the chips we see start with something being dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
If you can see any of these, send us a picture:
- Damage beneath the taps
- Chips on the rim or sides
- Impact holes in acrylic
- Scratches you can feel with a fingernail
Comparing quotes
- Whether there are any call-out or travel charges
- What preparation is included
- How soon you can use it again
- How the colour is matched
What affects the price in Norton
Prices start from £95. There’s no area surcharge for Norton. What changes the price is:
- Whether we combine several jobs
- How much damage there is
- How hard the colour is to match
- Where the damage is and how we get to it
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
How to get a fixed price
Almost every job we do is priced from pictures. This is what to send:
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- Natural light rather than flash
- What it’s made of, if you know
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Materials and what they mean for the repair
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
How the visit works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a few hours in most cases. The room is left tidy and you’ll know when it can be used.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
- Have somewhere for us to park nearby if possible
Get a quote
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Our work in Norton
Norton is about 3 miles north of Evesham, in Worcestershire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in 376 places across Worcestershire. Our nearest city page is Birmingham, about 24 miles away.
Jobs in WR11 are booked in the same way as anywhere else. You’ll find streets such as King's Lane, Evesham Road and St Egwins Road, all of which we cover. If you are just outside Norton, we cover Lenchwick (1 mile south-west), Harvington (1 mile north-east), Offenham (1 mile south-east), Greenhill (2 miles south) and Atch Lench (2 miles north). Further out, we also cover Worcester (13 miles west), Redditch (12 miles north), Bromsgrove (15 miles north), Droitwich Spa (13 miles north-west), Evesham (3 miles south) and Pershore (6 miles west).
Near you in Norton
Typical jobs here are in homes near Church of St Egwin, Offenham Church of England First School and Prince Henry's High School and the streets around them. The closest station to Norton is Evesham station, roughly 2 miles south of the centre. Other landmarks nearby include The Almonry (2.6 miles south). Open spaces near Norton include Greenhill.
Also in Norton
When a repair is not the answer
In fairness, some problems need a different fix:
- Wear across the whole surface, which needs re-enamelling
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Questions from Norton
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Which areas do you work in?
Across the UK, so Norton is covered. Prices don’t change with location.
Can you quote from pictures?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Can you repair a failed DIY repair?
Regularly. The old material comes out, any rust is treated, then we repair it properly.
Is a holed acrylic bath repairable?
Generally. Send us a photo of the hole and one from under the bath if you can.
What happens next?
You’ll get a fixed quote back, normally with dates to choose from. You are under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
