Worcestershire · England
Bath chip & crack repair in Harvington, Worcestershire
We travel to Harvington for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Chips along the edge of the bath
- Chips caused by builders
Bath repair in Harvington without replacing anything
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. Common call-outs are for cracks in an acrylic bath and scuffs and scratches in the surface, on whirlpool & spa baths, acrylic and cast iron enamel.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Harvington (WR11)
- Region
- Worcestershire
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we cannot put right
A repair is not right for every job, including:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath that moves underfoot, until its support is fixed
- Rust that has eaten right through a steel bath
Send us photos and we will tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Acrylic
What bath repair costs
Prices start from £95. A fixed quote means you know the cost before booking. We look at:
- The material
- How many areas need work
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
Send pictures for a quote
We price nearly every job from photos. This is what to send:
- Good light, ideally daylight, without flash glare
- What it’s made of, if you know
- The postcode, so we can plan the visit
- A photo taken from further back
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Places near Harvington
More services for Harvington
Covering Harvington
Harvington is about 4 miles north of Evesham, in Worcestershire. Our repair technicians come to clients in Harvington, so nothing has to leave your home. We cover 376 places across Worcestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 23 miles away.
Jobs in WR11 are booked in the same way as anywhere else. You will find streets such as Station Road, Village Street and Ragley Road. Neighbouring places we cover include Norton (1 mile south-west), Rushford (2 miles north), Lenchwick (2 miles south-west), Atch Lench (2 miles north-west) and Offenham (2 miles south). Further out, we also cover Worcester (13 miles west), Redditch (11 miles north), Bromsgrove (15 miles north-west), Droitwich Spa (13 miles north-west), Evesham (4 miles south) and Pershore (7 miles west).
What’s near Harvington
Our customers here include homes close to Church of St James and Harvington CofE First School, among other places. The nearest railway station is Evesham station, roughly 3 miles south of the centre. Nearby you will also find The Almonry (3.5 miles south). The countryside around Harvington includes Greenhill.
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a morning or an afternoon for most jobs. We leave the room clean and you will know when it can be used.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the next day.
How to prepare
- Clear the area around the damage
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
Ask for a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Related advice
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
What you get with us
- Normally one visit, start to finish
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
- No need to remove anything
Take a look at our pricing and guide to resurfacing and replacement costs.
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Common problems we fix in Harvington
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
Customers usually contact us about:
- Chips on the rim or sides
- Impact holes in acrylic
- An old repair that has yellowed or come loose
- A cracked acrylic bath
Comparing quotes
- If travel is included in the price
- What happens if they find more damage
- When it can be used again
- Who will actually do the work
Questions from Harvington
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do you cover Harvington?
Yes. We cover the whole UK and travel to Harvington. Send us photos for a fixed quote, or call 0345 017 0787.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can you quote from pictures?
Typically, yes. Clear photos let us give you a fixed quote without visiting.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
How much does bath repair cost in Harvington?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Landlords, agents and businesses in Harvington
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We are used to working with agents and managing companies. Send the address, pictures and access details and we’ll arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
