Worcestershire · England
Bath chip & crack repair in Norton, Worcestershire
Bath repair in and around Norton: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Holes from dropped items
- A chipped rim or side
Bath repair in Norton, done in place
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all repaired in place, usually in a single visit. Our technicians work on cast iron enamel, acrylic and whirlpool & spa baths, and people most often call us about chips under the taps and scuffs and scratches in the surface.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Norton (WR5)
- County
- Worcestershire
- Warranty
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Norton: your questions answered
How do I get a price for bath repair in Norton?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you repair coloured baths?
Yes. We mix the colour on the day to match, including older coloured suites.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
How long does the repair take to cure?
Generally the day after. We confirm the time before we leave.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Aftercare tips
Simple care helps the repair last. Our advice:
- Do not leave a fresh chip for long
- Rinse the bath after use, especially in hard water areas
- If an acrylic bath flexes, have its feet adjusted
- Protect the bath with a towel when doing jobs nearby
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
How we price bath repair
Prices start from £95. We give every job a fixed price from photos. These are the things that affect it:
- The material
- How many items we do on one visit
- How hard the colour is to match
- Any earlier repairs that need removing first
Compared with replacing, repairing typically costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Any details about the material
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Do you need bath repair in Norton?
Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Send us a photo if you notice any of these:
- Holes from dropped items
- Chips on the rim or sides
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
Before you book anyone
- When it can be used again
- What protection goes down before work starts
- If travel is included in the price
- Whether a trained technician does the job
Landlords, agents and businesses in Norton
Landlords, letting agents and housing providers in Norton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
When a repair is not the answer
It helps to know what we can’t do too:
- Cracks in parts of an acrylic bath we can’t get to from below
- A bath that moves underfoot, until its support is fixed
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us pictures and we will tell you honestly before booking.
Materials we work on in Norton
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
Before we arrive
- Tell us about parking, stairs or access
- Open a window if you can
- Tell us if there are stairs or a lift
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Nearby places to Norton
Also in Norton
Norton and nearby
Norton is about 2 miles south of Worcester, in Worcestershire. Whether you are in the middle of Norton or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Norton is one of 376 towns and villages in Worcestershire we cover. We work right across the region, from Norton to Birmingham (about 25 miles away).
We work across the WR5 postcode area. Whether you live on Crookbarrow Road, Toulouse Drive and Gazala Drive or anywhere nearby, a technician can come to you. Neighbouring places we cover include Hatfield (1 mile south-east), Red Hill (1 mile north), Littleworth (1 mile south-east), Whittington (1 mile north-east) and Swinesherd (2 miles north-east). Further out, we also cover Redditch (14 miles north-east), Bromsgrove (13 miles north-east), Great Malvern (6 miles south-west), Droitwich Spa (7 miles north), Evesham (12 miles south-east) and Stourport-on-Severn (13 miles north).
What’s near Norton
Typical jobs here are in homes near Church of St James, The Retreat pub and Worcester Woods Country Park, among other places. Nearby too are St Mary's School (1.3 miles north), Nunnery Wood High School (1.5 miles north) and Whittington CofE Primary School (0.8 miles north-east). The nearest railway station is Worcestershire Parkway station, about 1.5 miles east of the centre. Well-known places in the area include Worcester Castle (2 miles north-west) and CrownGate Shopping Centre (2.3 miles north-west).
About our accreditations · Every repair comes with a one-year guarantee.
