Worcestershire · England
Bath Repair for Swinesherd homes
Local bath repair for Swinesherd: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- Rusty patches near the plughole
- A hole punched through by something heavy
What we’re called out for in Swinesherd
Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Send us a photo if you notice any of these:
- Impact holes in acrylic
- Chips under the taps
- Cracks in an acrylic bath
- Scuffs and scratches in the surface
Before you book anyone
- What prep work is covered
- Whether the price is fixed and includes VAT
- How the colour is matched
- Who will actually do the work
How we handle bath repair in Swinesherd
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. Proper preparation, careful filling and shaping, then colour and gloss matching so it sits flush with the rest of the bath. If you are dealing with cracks in an acrylic bath and rust by the waste and overflow, we can help, whatever the material.
All our work is covered by a one-year guarantee, wherever you are in Worcestershire.
- Area
- Swinesherd (WR5)
- County
- Worcestershire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
More services for Swinesherd
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
How to look after the repair
Looking after the surface is easy:
- Avoid scourers, wire wool and gritty cream cleaners
- Clean with warm water and a mild detergent
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
Do not leave razors, cans or hair grips in the bath, because they can mark the enamel. A dripping tap should be fixed early, too.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Swinesherd and nearby
Swinesherd is about 2 miles south-east of Worcester, in Worcestershire. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Swinesherd is one of 376 towns and villages in Worcestershire we cover. Our jobs stretch from Swinesherd to Birmingham (23 miles away).
Every address in WR5 is covered. Other places close to Swinesherd include Whittington (1 mile south), Red Hill (1 mile west), Ronkswood (1 mile north-west), Norton (2 miles south-west) and Sneachill (2 miles east). Larger places within reach include Redditch (13 miles north-east), Kidderminster (14 miles north), Bromsgrove (11 miles north-east), Great Malvern (8 miles south-west), Droitwich Spa (5 miles north) and Evesham (12 miles south-east).
Local landmarks in Swinesherd
Around Swinesherd, we work in homes near Nunnery Wood Primary School, Church of St Philip and St James and Worcester Woods Country Park. Nearby too are Nunnery Wood High School (0.6 miles west) and Worcester Sixth Form College (within half a mile west). The nearest railway station is Worcester Shrub Hill station, roughly 1.6 miles north-west. A little further out are Worcestershire Royal Hospital (0.5 miles north-west) and Worcester Castle (2 miles west).
What we cannot put right
To be straight with you, there are a few things a repair won’t fix:
- Metal that has corroded all the way through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
- Acrylic
Your questions about bath repair in Swinesherd
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
How do I get a price for bath repair in Swinesherd?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
What areas do you cover?
We cover the entire UK, including Swinesherd and the rest of Worcestershire. Just include your postcode and we will confirm dates.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
Repair or replace in Swinesherd?
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. The price reflects the work involved, not where you live. You will see the full price before booking, with nothing added on the day.
Why book with us
- One-year guarantee on every repair
- No need to remove anything
- Technicians who travel to you, UK-wide
- One visit for most repairs
Take a look at our pricing or guide to resurfacing and replacement costs.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
How it works
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours, tidy-up included.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, normally the day after.
Before we arrive
- Clear the area around the damage
- Let us know if it has been repaired before
- Tell us about parking, stairs or access
Get a quote
Most clients in Swinesherd get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
