Greater London · England
Bath Repair in Norwood New Town
Damaged bath in Norwood New Town? We put it right where it is, match it on site and guarantee the work for a year.
- Repairs from £95
- Cracks in an acrylic bath
- Chips caused by builders
How we handle bath repair in Norwood New Town
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Typical jobs include an old repair that has yellowed or come loose and impact holes in acrylic, in cast iron enamel, pressed steel enamel and whirlpool & spa baths.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Where
- Norwood New Town (SE19, SE27, SE21)
- County
- Greater London
- Cover
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath repair in Norwood New Town
Is a holed acrylic bath repairable?
In most cases. Send us a picture of the hole and one from under the bath if you can.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Norwood New Town.
Do I have to be there?
Someone needs to let us in and show us the job. You do not need to watch us work.
Can you redo an old repair?
Yes. We take out the old repair and do it properly. Mention it when you send photos.
What happens if you find more damage?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Is there a call-out fee?
We do not add a call-out fee. Your fixed quote includes everything.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
Do you cover the entire of Greater London?
We work UK-wide, so Norwood New Town is covered. Our prices are the same everywhere.
What happens on the day
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Plan for two to three hours for most chips from start to finish. Before we go, we will explain how long to leave it and how to care for it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
How to prepare
- Open a window if you can
- Let us know which floor the room is on
- Clear toiletries, mats and anything else from around the area
Get a quote
To get a price, send a couple of pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Related advice
Honest limits
To be straight with you, there are a few things a repair will not fix:
- Water coming from the waste or taps rather than the bath
- Wear across the entire surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
Towns and villages near Norwood New Town
Also in Norwood New Town
Landlords, agents and businesses in Norwood New Town
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We carry out planned and one-off repairs for housing associations and facilities teams in Greater London and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Can I fix it myself?
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Our work in Norwood New Town
Norwood New Town is about 4 miles south of Stockwell, in Greater London. Jobs in Norwood New Town are booked in like any other job: a fixed quote from pictures, then a visit to do the work. We cover all 764 towns and villages across Greater London, from the larger towns to small villages.
We work across SE19, SE27 and SE21. Whether you live on Dover Road, Moore Road and Gipsy Road or anywhere nearby, we can come to you. Being close to the A214, Norwood New Town is easy for our technicians to reach. If you are just outside Norwood New Town, we cover Upper Norwood (1 mile east), Gipsy Hill (1 mile north-east), West Norwood (1 mile north), Crystal Palace (1 mile east) and West Dulwich (1 mile north). Further out, we also cover London (5 miles north), City of Westminster (7 miles north), Marylebone (7 miles north), Kensington (7 miles north-west), St Pancras (7 miles north) and Shoreditch (7 miles north).
Local landmarks in Norwood New Town
Typical jobs here are in homes near The Sparrowhawk pub, Virgo Fidelis Convent Senior School and Rockmount Primary School. Also close by are Long Meadow (0.6 miles north-east), New Covenant Church-Equipping People (less than half a mile north) and Hillcrest (under half a mile north-east). Norwood New Town’s nearest station is Gipsy Hill station, roughly 0.5 miles north-east. Well-known places in the area include St Leonard's (1.8 miles west) and Crystal Palace Museum (0.7 miles east). Green spaces nearby include Battersea Park Lake and Dulwich Upper Wood.
Common problems we fix in Norwood New Town
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we are called about are:
- Deep scratches in acrylic
- Damage beneath the taps
- A failed DIY repair that is discoloured or lifting
- Cracks in an acrylic bath
Comparing quotes
- Whether the price is fixed and includes VAT
- How soon you can use it again
- Whether there are any call-out or travel charges
- What protection goes down before work starts
Looking after it afterwards
Nothing complicated is needed:
- Make sure an acrylic bath is firm underfoot
- Store metal items away from the bath
- Cover the bath during DIY or decorating
- A dripping tap stains enamel, so fix it early
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
If water is getting through a crack, stop using the bath until it’s repaired. Leaks under a bath can damage floors and ceilings.
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
How we price bath repair
Repairs from £95. A fixed quote means you know the cost before booking. We take into account:
- How hard the colour is to match
- How much damage there is
- Whether we combine several jobs
- Previous DIY repairs that have to come out
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
Most quotes are done from photos alone. To help us price it:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- One picture of the entire bath
- Your postcode, so we can check dates
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
