Norfolk · England

Bath chip & crack repair in Old Hall Street, Norfolk

Bath repair across Old Hall Street and nearby, done in a single visit in most cases.

  • Repairs from £95
  • A chip where the taps sit
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Old Hall Street

Old Hall Street questions

What areas do you cover?

Across the UK, so Old Hall Street is covered. Our prices are the same everywhere.

What if the damage is worse than the photos show?

It’s rare, but if it happens we talk to you first. You decide whether to go ahead.

What happens next?

We come back with a fixed price, normally with dates to choose from. You are under no obligation.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Can you fix rust around the plughole?

Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.

Do I have to be there?

Someone needs to let us in and show us the job. You do not need to watch us work.

Can tenants book a repair?

We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.

Is a bath repair permanent?

Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.

About our bath repair in Old Hall Street

A typical bath repair is a few hours’ work, and the bath is back in use the following day. You won’t need a plumber or tiler, because nothing is disconnected. If you are dealing with chips caused by builders and a hole punched through by something heavy, we can typically put it right.

The work is covered for a year after we finish. If anything is not right, ring us and we will come back.

Bath enamel chip by the waste, filled and colour matched (before and after)
Location
Old Hall Street (NR28)
Area hub
Norfolk
Cover
12 months on all our work
Price
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

Materials and what they mean for the repair

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.

Acrylic

Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.

Landlords, agents and businesses in Old Hall Street

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.

We work for landlords, letting agents and housing providers in Old Hall Street as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Keeping it looking good

To keep it looking its best for years:

  • Use a soft cloth and washing-up liquid for everyday cleaning
  • Store metal items away from the bath
  • Fix dripping taps early to stop staining and limescale
  • Rinse the bath after use, especially in hard water areas

Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.

Common problems we fix in Old Hall Street

A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.

The things customers typically mention when they call include:

  • Damage done while the bathroom was being fitted
  • Chips on the rim or sides
  • An old repair that has yellowed or come loose
  • Impact holes in acrylic

What your quote should include

  • What protection goes down before work starts
  • The length of the guarantee and what it covers
  • Aftercare advice
  • What happens if they find more damage

Choosing a repair company

How the visit works

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a few hours, depending on the damage. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Have a window or extractor fan available
  • Have somewhere for us to park nearby if possible
  • Move bottles, mats and clutter away from the area

Getting a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.

Get a free quote

Advice

What we can’t put right

To be straight with you, some problems need a different fix:

  • Acrylic cracks with no access behind them
  • A bath that moves underfoot, until its support is fixed
  • Wear across the whole surface, which needs re-enamelling

If in doubt, send photos and we’ll say what we think.

Surfaces we repair

  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel

Where we work around Old Hall Street

Old Hall Street is about 2 miles north-east of North Walsham, in Norfolk. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Old Hall Street is one of 797 towns and villages in Norfolk we cover.

Postcode districts we cover here: NR28. Neighbouring places we cover include Knapton (1 mile north-east), Swafield (1 mile south-west), Paston Green (1 mile north-east), Edingthorpe Green (1 mile south-east) and Paston (1 mile north-east). We also work in nearby towns such as Norwich (15 miles south), Sprowston (14 miles south), Thorpe St Andrew (15 miles south), Sheringham (11 miles north-west), Taverham (15 miles south-west) and Cromer (7 miles north-west).

What’s near Old Hall Street

Typical jobs here are in homes near Church of St Peter and St Paul, North Walsham High School and Knapton Cutting. Old Hall Street’s nearest station is North Walsham station, about 2.6 miles south-west. Nearby you will also find St John Ambulance Museum (2.1 miles south-west) and Dilham Castle (4.8 miles south).

Map of Old Hall Street © OpenStreetMap contributors

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.

Repair or replace in Old Hall Street?

Replacing a fitted bath typically means a plumber, lifting out the old bath, making good the tiles and panel and disposing of the old one. A repair fixes just the damaged area in a single visit. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

Why choose Surface Doctor in Old Hall Street

  • Straight answers about what a repair can do
  • Every repair guaranteed for a year
  • No need to remove anything
  • Usually one visit, start to finish

Take a look at our pricing or resurfacing vs replacement cost guide.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.