Norfolk · England
Bath Repair in Swafield
Problem with your bath in Swafield? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Repairs from £95
- Chips caused by builders
- Chips along the edge of the bath
Bath repair in Swafield without replacing anything
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Whether it’s a cracked acrylic bath and an old repair that has yellowed or come loose, we can normally put it right, on pressed steel enamel, whirlpool & spa baths and acrylic alike.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Swafield (NR28)
- Region
- Norfolk
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath repair in Swafield?
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
Look out for these signs:
- Hairline or through cracks in acrylic
- Scuffs and scratches in the surface
- Damage beneath the taps
- A failed DIY repair that is discoloured or lifting
What your quote should include
- What aftercare is recommended
- What protection goes down before work starts
- What happens if the damage is worse than the pictures show
- If travel is included in the price
Places near Swafield
More services for Swafield
What affects the price in Swafield
Prices start from £95. Each job gets its own fixed quote. This is what makes a difference:
- What the surface is made of
- Any earlier repairs that need removing first
- Access to the area
- The size and number of damaged areas
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Quotes from your photos
You can take the pictures on your phone. Ensure they show:
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- A coin or ruler next to the damage for scale
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Aftercare tips
It’s all simple stuff:
- Clean with warm water and a mild detergent
- Don’t leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
- Ensure an acrylic bath is firm underfoot
There’s nothing special to do after a repair. Skip bleach and gritty creams and rinse after use.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
How the visit works
Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and we start. You can expect it to take two to three hours for most chips, and we’ll keep you posted as we go.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, usually by the following day, the bath is ready to use.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
Ask for a price
The quickest way to a price is to send two or three photos using our quote form or ring us. We will say right away if a repair is the right fix.
Read more
Different materials, different repairs
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Swafield and nearby
Swafield is about 2 miles north-east of North Walsham, in Norfolk. We travel to customers in Swafield and nearby villages, so there’s no workshop to go to. Swafield is one of 797 places in Norfolk where we work.
We work across NR28 and the streets around it. That includes homes on The Street, Knapton Road and Robinson's Loke and the roads around them. Close by, we cover Old Hall Street (1 mile north-east), Knapton (1 mile north-east), Edingthorpe Green (1 mile south-east), Spa Common (1 mile south) and Paston Green (2 miles north-east). Further out, we also cover Norwich (15 miles south), Sprowston (13 miles south), Thorpe St Andrew (15 miles south), Sheringham (11 miles north-west), Taverham (14 miles south-west) and Cromer (7 miles north-west).
Local landmarks in Swafield
Typical jobs here are in homes near Knapton Cutting, Church of St Nicholas and Paston College, among other places. The closest station to Swafield is North Walsham station, roughly 2.1 miles south-west. A little further out are St John Ambulance Museum (1.6 miles south-west) and Dilham Castle (4.8 miles south-east).
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
What we can’t put right
Honesty matters more than a booking, so here’s what a repair won’t do:
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
Your questions about bath repair in Swafield
Can you redo an old repair?
Regularly. We strip it out, deal with any rust and repair it again.
Is a bath repair permanent?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Is a cracked acrylic bath repairable?
Generally, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Is there any odour?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
What does bath repair cost?
Prices start from £95. We give a fixed quote from your photos. Send a close-up and a photo of the entire item with your NR28 postcode.
How long before I can use the bath?
Generally within a day, though it depends on what we’ve done.
How do I book?
Some pictures, your postcode and how to reach you. On the day, access to the room.
About our accreditations · Every repair comes with a one-year guarantee.
