Suffolk · England
Bath chip & crack repair in Orford, Suffolk
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Orford. Free, fixed quotes from your pictures.
- Repairs from £95
- Impact holes in acrylic
- Rusty patches near the plughole
How we price bath repair
Repairs from £95. We charge the same across the UK, including Orford. What changes the price is:
- The size and number of damaged areas
- What kind of damage it is
- Whether old repairs or coatings need taking off
- What the surface is made of
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.
Quotes from your pictures
You can take the photos on your phone. Just ensure we can see:
- A clear, close picture of the problem area
- Natural light rather than flash
- A coin beside the damage so we can judge size
- Where you are, by postcode
If you’re in Orford and want a price, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
About our bath repair in Orford
Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, normally in a single visit. Whether it’s damage done while the bathroom was being fitted and impact holes in acrylic, we can typically put it right, on cast iron enamel, pressed steel enamel and acrylic alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Orford (IP12)
- County
- Suffolk
- Guarantee
- One year on every repair
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Do you need bath repair in Orford?
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
It’s worth getting a quote if you see:
- Deep scratches in acrylic
- An old repair that has yellowed or come loose
- Chips along the edge of the bath
- Hairline or through cracks in acrylic
Questions to ask before you book
- Whether cleaning and preparation are in the price
- How the room is protected while they work
- When it can be used again
- Aftercare advice
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll arrange it.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Check that an acrylic bath doesn’t move when you stand in it
- Cover the bath during DIY or decorating
- Rinse the bath after use, especially in hard water areas
- Don’t leave razors or cans standing in the bath
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. On site, it takes a few hours for most jobs. The room is left tidy and you will know when it can be used.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the next day.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
Get a quote
To get a price, send a couple of pictures through our quote form or call us. We will tell you honestly if a repair is the right fix.
Related advice
Repair or replace: which is better?
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. A repair keeps it in place. Prices start from £95. Set against the cost of replacement, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- A fixed quote before you book
- Honest advice, even when it means no job
- Nothing taken out or refitted
- We leave the room as we found it
Take a look at our prices page or bath cost comparison.
Nearby places to Orford
Also in Orford
Questions from Orford
Can rust on a bath be repaired?
Yes, very frequently. The rust is cut back to clean metal and sealed before we fill and finish it.
How long before I can use the bath?
Typically the day after. We confirm the time before we leave.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Can you repair a chip on a coloured bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
About Orford
Orford is about 12 miles north-east of Felixstowe, in Suffolk. Anywhere in IP12, we come to you. Orford is one of 731 places in Suffolk where we work.
Here we cover the IP12 postcode area. You will find streets such as Market Hill, High Street and Pump Street. We also travel to Sudbourne (2 miles north), Chillesford (3 miles north-west), Boyton (3 miles south-west), Iken (3 miles north) and Butley (3 miles west). We also work in nearby towns such as Felixstowe (12 miles south-west), Kesgrave (12 miles west), Woodbridge (9 miles west), Priory Heath (15 miles west), Racecourse (15 miles west) and Leiston (8 miles north).
Near you in Orford
Typical jobs here are in homes near Kings Head Public House, St Bartholomews Church and Orford Church of England Voluntary Aided Primary School. Nearby you’ll also find Suffolk Underwater Studies Museum (within half a mile north-west) and Aldeburgh Hospital (4.7 miles north-east). For a walk, there is Captain's Wood.
About our accreditations · Every repair comes with a one-year guarantee.
