Kent · England
Bath chip & crack repair in Ospringe, Kent
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Ospringe, with a one-year guarantee on every repair.
- Repairs from £95
- An old repair that has yellowed or come loose
- A hole punched through by something heavy
Bath repair in Ospringe without replacing anything
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Common call-outs are for chips under the taps and rust spots around the plughole, in roll-top & freestanding, cast iron enamel and acrylic.
The work is guaranteed for twelve months. If there’s a problem with the repair within the year, we return and sort it.
- Area
- Ospringe (ME13)
- County
- Kent
- Cover
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath repair in Ospringe
Heavy toiletries are the biggest single cause of chips. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Keep an eye out for these signs:
- Scratches you can feel with a fingernail
- Holes from dropped items
- Damage beneath the taps
- Rusty patches near the plughole
Questions to ask before booking
- What preparation is included
- Whether a trained technician does the job
- What aftercare is recommended
- How soon you can use it again
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Landlord and trade work in Ospringe
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
What affects the price in Ospringe
Repairs from £95. You will know the full cost before you book. We look at:
- How many items we do on one visit
- What kind of damage it is
- Any earlier repairs that need removing first
- Access to the area
We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
You can take the pictures on your phone. Just make sure we can see:
- Something in shot to show the size
- One picture of the whole bath
- The material, if you know it
- One sharp close-up of the damage
Send us a picture of the damage and one of the entire item, and tell us you are in Ospringe, and we will reply with a fixed price.
Ospringe and nearby
Ospringe is about 1 mile south-west of Faversham, in Kent. Jobs in Ospringe are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We work in all 922 towns and villages in Kent, from the larger towns to small villages. You can also see our page for London, about 44 miles away.
Jobs in ME13 are booked in the same way as anywhere else. Local streets include Water Lane, Lower Road and Capel Road, all of which we cover. If you are just outside Ospringe, we cover Whitehill (1 mile south), Faversham (1 mile north-east), Davington (1 mile north-east), Brogdale (1 mile south) and Preston (1 mile east). Larger places within reach include Maidstone (15 miles west), Ashford (12 miles south), Canterbury (9 miles east), Sittingbourne (6 miles west), Whitstable (7 miles north-east) and Herne Bay (12 miles east).
Landmarks near Ospringe
In Ospringe, that means homes near Maison Dieu pub, Church of St Peter and St Paul and Oare Meadow. Other local landmarks include The Abbey School (0.6 miles south-east) and Ospringe Church of England Primary School (under half a mile south-west). Ospringe’s nearest station is Faversham station, about 0.8 miles east of the centre. A little further out are Newnham Castle (3.5 miles south-west).
What else we do in Ospringe
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. The job generally runs to a few hours, including clearing up.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Preparing for the visit
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
Getting a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
Advice
Your questions about bath repair in Ospringe
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
What if the damage is worse than the photos show?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Will the repair last?
A properly prepared repair should last a long time, and it’s guaranteed for a year. Gentle cleaning helps it last.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Put a towel in the bath if you are working above it
- Rinse the bath after use, especially in hard water areas
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
Keep metal objects like razors and cans off the surface, as they can leave rust marks. A dripping tap should be fixed early, too.
Stop using the bath if a crack lets water through until it’s repaired. Water under the bath can damage the floor and the ceiling below.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair will not do:
- A bath worn all over, where resurfacing makes more sense
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A steel bath rusted through
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Ospringe
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
