Shropshire · England
Bath Repair for Oxon homes
Bath repair in Oxon without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Hairline or through cracks in acrylic
- Chips caused by builders
Bath repair in Oxon without replacing anything
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. You can typically use the bath the following day. We regularly repair cast iron enamel, roll-top & freestanding and pressed steel enamel, and common reasons people get in touch are rust by the waste and overflow and cracks in an acrylic bath.
Every repair is covered by our one-year guarantee.
- Where
- Oxon (SY3, SY5)
- Area hub
- Shropshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Oxon
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
Is a holed acrylic bath repairable?
Generally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps it last.
Do you cover Oxon?
Yes. We work across the UK and come to Oxon and the rest of Shropshire. Send photos and we’ll quote, or call 0345 017 0787.
When can you do it?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
Keeping it looking good
To keep it looking its best for years:
- Have new chips seen to early
- Put a towel in the bath if you are working above it
- Give the bath a quick rinse after use
- If an acrylic bath flexes, have its feet adjusted
There is nothing special to do after a repair. Avoid bleach-based and gritty cleaners and rinse after use.
Small chips are quick to repair. Left alone, they stain and can rust, so it’s worth getting them done early.
Repairing versus replacing in Oxon
People frequently assume a cracked or chipped bath has to come out. Normally it doesn’t: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why us?
- We will tell you if it’s not worth repairing
- Technicians who travel to you, UK-wide
- One-year guarantee on every repair
- We leave the room as we found it
Read our pricing and guide to resurfacing and replacement costs.
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Where the damage is and how we get to it
- The type of damage
- The material and finish
- The colour and finish to match
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
You can normally get a fixed quote without us visiting. To help us price it:
- Where you are, by postcode
- Any details about the material
- One picture of the whole bath
- A clear, close picture of the problem area
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Our work in Oxon
Oxon is about 2 miles west of Shrewsbury, in Shropshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. We work in 433 places in Shropshire, from the larger towns to small villages. Our jobs stretch from Oxon to Birmingham (about 42 miles away).
Our visits in SY3 and SY5 are booked in the same way as anywhere else. Streets in the area include Oak Lane, Pump Lane and Coach Road, and we cover them all. We also travel to Bowbrook (1 mile south), Calcott (1 mile north-west), Bicton (1 mile north-west), Montford Bridge (2 miles north-west) and Ford (3 miles west). We also work in nearby towns such as Oswestry (14 miles north-west), Monkmoor (3 miles east), Underdale (3 miles east), Wem (10 miles north), Sutton (3 miles south-east) and Broseley (15 miles south-east).
Local landmarks in Oxon
Around Oxon, we work in homes near Shrewsbury School, Oxon CofE Primary School and Christ Church Shelton and Oxon and the streets around them. Oxon’s nearest station is Shrewsbury station, roughly 2.2 miles east. Other landmarks nearby include The Parade Shopping Centre (0.8 miles south-east) and Rowleys House Museum (2 miles east). The countryside around Oxon includes Bomere Pool.
Towns and villages near Oxon
Also in Oxon
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Landlords, agents and businesses in Oxon
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Oxon, we’ll quote for several properties at once. Send pictures for each one and we will come back with a combined price.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
The process
Your technician turns up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take a few hours, and the room is left clean and tidy.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the next day.
Before we arrive
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
Ask for a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Related advice
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- A steel bath rusted through
- Acrylic cracks with no access behind them
- Flexing caused by a failed cradle or loose feet
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Acrylic
About our accreditations · Every repair comes with a one-year guarantee.
