Solihull · England

Bath Repair for Packwood Gullet homes

Bath repair in Packwood Gullet without the cost of replacing. Get a fixed quote from your pictures, then we come to you.

  • Repairs from £95
  • Damage beneath the taps
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Packwood Gullet

Repair or replace: which is better?

Many people think a damaged bath means a new one. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Prices start from £95. Set against the cost of replacement, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why choose Surface Doctor in Packwood Gullet

  • Fixed prices from your pictures
  • Accredited with CHAS, Constructionline and SafeContractor
  • Everything repaired in place
  • We leave the room as we found it

Read our prices page or bath cost comparison.

How we handle bath repair in Packwood Gullet

We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. Typical jobs include damage beneath the taps and impact holes in acrylic, in roll-top & freestanding, pressed steel enamel and acrylic.

Your repair is guaranteed for a year, as with every job we do.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Location
Packwood Gullet (B93)
Region
Solihull
Cover
12 months on all our work
Quote
From £95. Fixed and free, based on pictures
Call
0345 017 0787
Updated
23 October 2026

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.

How it works

We turn up when we said we would, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take two to three hours for most chips, and we leave the room as we found it.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We tidy up and tell you when the bath can be used, generally the day after.

Before we arrive

  • Mention any earlier repairs or resurfacing
  • Have somewhere for us to park nearby if possible
  • Clear the area around the damage

Get a quote

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.

Send pictures for a quote

Read more

Packwood Gullet questions

Will the price change on the day?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

Will the repair last?

Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.

How invisible is a bath repair?

The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.

Can rust on a bath be repaired?

Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.

Can you redo someone else’s repair?

Generally, yes. Let us know what was used before and we’ll plan for it.

Is it safe with children and pets around?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.

When can I have a bath again?

Typically the following day. We confirm the time before we leave.

Aftercare tips

Simple care helps the repair last. We recommend:

  • Keep abrasive pads and gritty cleaners away from the bath
  • Rinse it down after each bath
  • Get a dripping tap fixed promptly
  • If an acrylic bath flexes, have its feet adjusted

Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.

Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.

Should I try a DIY kit first?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Materials and what they mean for the repair

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.

Composite and resin

Stone resin and composite baths are heavy and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

What bath repair costs

Prices start from £95. There is no charge for travel to Packwood Gullet. The price depends on:

  • How much damage there is
  • Unusual colours or finishes
  • Doing more than one item at once
  • Access to the area

We charge the same wherever you are, so there is no premium for Packwood Gullet. What changes the price is the job itself: how much damage, what it’s made of and how many items.

Send photos for a quote

Two or three clear pictures are usually enough. It helps if you send:

  • Where you are, by postcode
  • Natural light rather than flash
  • What it’s made of, if you know
  • A coin or ruler next to the damage for scale

We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Honest limits

In fairness, some problems need a different fix:

  • Flexing caused by a failed cradle or loose feet
  • Acrylic cracks with no access behind them
  • A whole bath that’s dull or worn, where a full re-enamel is the better fix

Send us pictures and we will tell you honestly.

Surfaces we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel
  • Roll-top & freestanding
  • Acrylic

About Packwood Gullet

Packwood Gullet is about 4 miles south-east of Solihull, in Solihull. From the centre of Packwood Gullet to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Packwood Gullet is one of 33 places in Solihull we cover. You can also see our page for Birmingham, about 9 miles away.

Every address in B93 is covered. From Windmill Lane, Grange Road and Mill Pool Lane or anywhere nearby, a technician can come to you. We also cover the places around Packwood Gullet: Dorridge (1 mile north), Packwood (1 mile south-east), Darley Green (1 mile east), Norton Green (1 mile north-east) and Bentley Heath (1 mile north). Larger places within reach include Solihull (4 miles north-west), Elmdon Heath (4 miles north), Dickens Heath (4 miles north-west), Cheswick Green (3 miles north-west), Longdon (3 miles north) and Marston Green (7 miles north).

Local landmarks in Packwood Gullet

Our clients here include homes close to Dorridge Wood, The Railway Inn and Dorridge Primary School, among other places. You will also find Arden (1.6 miles north-east) and St Philip's Church Dorridge (0.6 miles north). The closest station to Packwood Gullet is Dorridge station, about 0.5 miles north. Further afield, we also cover the area around Baddesley Clinton (2.6 miles south-east) and Touchwood (3.5 miles north). For a walk, there’s Henley Sidings.

Map of Packwood Gullet © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.