Essex · England
Bath Repair for Paglesham homes
Bath repair for Paglesham, without a refit. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Rust spots around the plughole
- Holes from dropped items
Paglesham and the surrounding area
Paglesham is about 3 miles south-west of Burnham-on-Crouch, in Essex. Whether you are in the middle of Paglesham or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our repair technicians cover all 644 towns and villages across Essex, from the larger towns to small villages. Our nearest city page is London, about 39 miles away.
Jobs in SS4 work the same way as everywhere else we cover. We also cover the places around Paglesham: Barling (2 miles south), Great Stambridge (2 miles west), Little Wakering (3 miles south), Stonebridge (3 miles south-west) and Sutton (3 miles south-west). Further out, we also cover Basildon (14 miles west), Maldon (10 miles north-west), Canvey Island (10 miles south-west), Rayleigh (8 miles west), Wickford (11 miles west) and Rochford (4 miles west).
Around Paglesham
In Paglesham, that means homes near St Peters Mission Hall and The Plough And Sail Inn and the streets around them. The nearest railway station is Burnham-On-Crouch station, roughly 2.7 miles north. A little further out are Southend University Hospital (5.3 miles south-west) and Rayleigh Windmill Museum (3.7 miles west). Not far away are Lion Creek and Lower Raypits.
Bath repair at your home in Paglesham
A typical bath repair is a few hours’ work, and you can generally bathe again the following day. You will not need a plumber or tiler, because nothing is disconnected. Whether it’s an old repair that has yellowed or come loose and cracks in an acrylic bath, we can help, whatever the material.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Paglesham (SS4)
- Region
- Essex
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we are called out for in Paglesham
Rust normally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Look out for any of the following:
- Chips under the taps
- Cracks in an acrylic bath
- A chipped rim or side
- Snagging damage from a refit
What your quote should include
- How long it needs to cure
- How the room is protected while they work
- A fixed price, and whether VAT is included
- How to look after the finish
Also near Paglesham
More services for Paglesham
Aftercare tips
How the surface is treated afterwards matters:
- Get any new chip repaired before it rusts
- Protect the bath with a towel when doing jobs nearby
- Do not scrub with anything abrasive
- Use a soft cloth and washing-up liquid for everyday cleaning
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Repair or replace in Paglesham?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Why book with us
- A fixed quote before you book
- Nothing taken out or refitted
- A year’s guarantee on all work
- Colour mixed on the day to match
Take a look at our pricing or bath cost comparison.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, especially around the waste, so early repairs matter.
How it works
We begin by going over the job with you. After that, protection goes down around the work area and we start. It normally takes a few hours, depending on the damage, and we’ll keep you posted as we go.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the following day, the bath is ready to use.
Preparing for the visit
- Keep pets and children out of the room while we work
- Have somewhere for us to park nearby if possible
- Ensure the room can be ventilated
How to get a price
The quickest way to a price is to send two or three pictures using our quote form or ring us. We will tell you honestly if a repair is the right fix.
Related advice
Landlord and trade work in Paglesham
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We work for landlords, letting agents and housing providers in Paglesham as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
What a repair cannot fix
Not everything can be repaired, and we will tell you before we start. Repairs will not solve:
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we cannot reach from underneath
- A steel bath rusted through
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
- Cast iron enamel
Paglesham questions
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Are there extra charges for Paglesham?
There is no separate call-out charge. The fixed price covers the visit and the work.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Do you repair coloured baths?
Yes, coloured baths are no problem. We tint the finish to your bath on site.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote.
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you redo an old repair?
Yes, we do this frequently. We strip it out, deal with any rust and repair it again.
About our accreditations · Every repair comes with a one-year guarantee.
