Essex · England

Bath and surface repairs in SS4

Repairs and resurfacing across SS4, from Rochford, Ashingdon and Canewdon. Free, fixed quotes from your photos and a one-year guarantee.

How bath repair works in SS4

We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Typical jobs include damage beneath the taps and chips on the rim or sides, on pressed steel enamel, cast iron enamel and whirlpool & spa baths.

Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and we start. It normally takes two to three hours for most chips, and we’ll tell you if anything changes.

  1. We start by looking at the damage and confirming the plan with you.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. Finally, it’s polished to match the shine and left to cure.

Prices in SS4

Our bath repair starts from £95. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we will give you the exact figure.

Why choose Surface Doctor

  • Rooms protected and left tidy
  • Most jobs done in one visit
  • No extra charge for your area
  • Free fixed quotes from pictures

Get a quote

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed quote.

Near you in Rochford

Around Rochford, we work in homes near Magnolia Fields, Church of St Andrew and The Marlborough Head pub. Other local landmarks include King Edmund School (0.7 miles north) and St Teresa's Catholic Primary School (under half a mile east). The closest station to Rochford is Rochford station, roughly 0.5 miles south-east of the centre. Other landmarks nearby include Rayleigh Windmill Museum (0.6 miles south-east) and Southend University Hospital (2.3 miles south). For a walk, there is Pound Wood.

Can I fix it myself?

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

Should you replace it?

Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like isn’t cheap. A repair keeps it in place.

What your quote should include

  • Whether a trained technician does the job
  • If travel is included in the price
  • How long it needs to cure
  • Whether the price is fixed and includes VAT

How the damage happens

Dropped items cause the majority of chips, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.

Send us a photo if you notice any of these:

  • Chips under the taps
  • Scuffs and scratches in the surface
  • Impact holes in acrylic
  • Chips caused by builders

Keeping it looking good

To keep it looking its best for years:

  • Stick to mild cleaners and a soft cloth
  • Put a towel in the bath if you’re working above it
  • Give the bath a quick rinse after use
  • Do not leave a fresh chip for long

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.

Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and water can get through to the floor below.

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

FAQs for SS4

Does someone need to be in?

We need someone to let us in. After that, you can carry on with your day.

What happens once I’ve sent photos?

We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.

How invisible is a bath repair?

On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.

Are there extra charges for SS4?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Do you repair coloured baths?

Yes. The colour is mixed on site to suit your bath, including pastel and older colours.

Do you come to SS4?

Yes. We cover the entire UK and travel to SS4. Send photos and we’ll quote, or call 0345 017 0787.

Is it OK to have pets in the house?

Just keep them out of the work area. We will let you know when it’s safe to use again.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.