Hampshire · England
Bath chip & crack repair in Pamber Heath, Hampshire
We travel to Pamber Heath for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Rust spots around the plughole
- Scratches you can feel with a fingernail
Should you replace it?
Replacing a bath rarely stops at the bath: tiles along the rim normally crack when it comes out, a new panel is often needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Why Pamber Heath customers choose us
- A fixed quote before booking
- Nothing taken out or refitted
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing and bath cost comparison.
Bath repair at your home in Pamber Heath
Repairing baths is what we do most. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, generally in a single visit. If you’re dealing with damage done while the bathroom was being fitted and an old repair that has yellowed or come loose, we can help, on cast iron enamel, pressed steel enamel and whirlpool & spa baths alike.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Pamber Heath (RG26, RG7)
- Region
- Hampshire
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
A few problems are outside what a surface repair can do:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Rust that has eaten right through a steel bath
- Leaking fittings, which need a plumber
Send us pictures and we will tell you honestly before booking.
Materials we work on in Pamber Heath
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Common problems we fix in Pamber Heath
Glass and heavy bottles cause more chips than anything else. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Typical reasons for a call-out include:
- A hole punched through by something heavy
- Damage beneath the taps
- Damage done while the bathroom was being fitted
- A failed DIY repair that’s discoloured or lifting
Comparing quotes
- A fixed price, and whether VAT is included
- Whether a trained technician does the job
- How changes to the job are handled
- Whether cleaning and preparation are in the price
Pamber Heath: your questions answered
Is there any odour?
There may be a mild smell during the work.
Is a holed acrylic bath repairable?
Typically. Photos of the hole and the underside help us check.
Is a bath repair permanent?
Done properly, a repair lasts for years, and it’s guaranteed for a year. Gentle cleaning helps it last.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Do you cover Pamber Heath?
Yes. We cover the whole UK and travel to Pamber Heath. Send us photos for a fixed quote, or call 0345 017 0787.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Aftercare tips
So the finish stays in good condition:
- Do not leave razors or cans standing in the bath
- Check that an acrylic bath doesn’t move when you stand in it
- Avoid scourers, wire wool and gritty cream cleaners
- Do not leave a fresh chip for long
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- What the surface is made of
- Doing more than one item at once
- The colour and finish to match
- The size and number of damaged areas
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from pictures
Two or three clear pictures are typically enough. Try to include:
- Any details about the material
- Where you are, by postcode
- Something in shot to show the size
- A picture taken from further back
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
What we do, step by step
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the work takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
- Tell us about parking, stairs or access
Get a quote
For a price in Pamber Heath, pictures are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
About Pamber Heath
Pamber Heath is about 1 mile east of Tadley, in Hampshire. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. Pamber Heath is one of 683 places in Hampshire where we work. We work right across the region, from Pamber Heath to London (45 miles away).
We cover every part of RG26 and RG7. Streets in the area include Soke Road, Heath Road and Church Road, and we cover them all. We also travel to Silchester (1 mile south-east), Aldermaston Soke (1 mile north), Old Warren (1 mile north), Tadley (1 mile west) and Padworth Common (2 miles north). We also work in nearby towns such as Basingstoke (6 miles south), Fleet (13 miles south-east), Yateley (12 miles east), Hook (9 miles south-east), Popley (5 miles south) and Kempshott (8 miles south).
What’s near Pamber Heath
We visit homes around Silchester Church of England Primary School, Padworth Common Local Nature Reserve and The Hurst School. Pamber Heath’s nearest station is Bramley (Hants) station, roughly 3.1 miles south-east. Well-known places in the area include Calleva Museum (0.9 miles east) and Park Prewett Hospital (5.4 miles south). Green spaces nearby include Hosehill Lake.
Places near Pamber Heath
More services for Pamber Heath
About our accreditations · Every repair comes with a one-year guarantee.
