Kent · England
Bath chip & crack repair in Park Wood, Kent
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Park Wood and across Kent. Send photos for a free, fixed quote.
- Repairs from £95
- Damage beneath the taps
- Impact holes in acrylic
How we handle bath repair in Park Wood
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. You can generally use the bath the next day. If you are dealing with chips on the rim or sides and a failed DIY repair that’s discoloured or lifting, we can help, on roll-top & freestanding, acrylic and whirlpool & spa baths alike.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Location
- Park Wood (ME15, ME17, ME14)
- County
- Kent
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in Park Wood
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
How much does bath repair cost in Park Wood?
Prices start from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item and your postcode.
Do you cover Park Wood?
Yes, we do. Repair technicians travel to Park Wood from across the region, with no extra charge for travel.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
How long before I can use the bath?
Most baths can be used the following day. We will tell you the exact curing time when we finish.
Signs you need bath repair in Park Wood
Rust generally starts where water sits, by the plughole, beneath dripping taps or in an unrepaired chip. Water on bare metal causes rust that creeps under the surrounding enamel.
These are the problems we’re asked about most:
- Deep scratches in acrylic
- Rust by the waste and overflow
- Snagging damage from a refit
- A chipped rim or side
What to look for in a quote
- Aftercare advice
- Whether the price covers travel
- How long it needs to cure
- A fixed price, and whether VAT is included
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.
Work for landlords and builders
We’re used to working with agents and managing companies. Send the address, photos and access details.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
How to look after the repair
It’s all simple stuff:
- Get a dripping tap fixed promptly
- Cover the bath during DIY or decorating
- Rinse the bath after use, especially in hard water areas
- Get any new chip repaired before it rusts
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath, avoiding abrasives.
If water is getting through a crack, stop using the bath. Water under the bath can damage the floor and the ceiling below.
Towns and villages near Park Wood
More services for Park Wood
What a repair can’t fix
Honesty matters more than a booking, so here’s what a repair will not do:
- Cracks in parts of an acrylic bath we can’t get to from below
- Flexing caused by a failed cradle or loose feet
- A whole bath that is dull or worn, where a full re-enamel is the better fix
Send us photos and we will tell you honestly.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Park Wood and nearby
Park Wood is about 2 miles south-east of Maidstone, in Kent. Customers in Park Wood get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Park Wood is one of 922 places in Kent we cover. Our jobs stretch from Park Wood to London (about 33 miles away).
Here we cover the ME15, ME17 and ME14 postcode area. Local streets include Bell Road, Selby Road and Essex Road, all of which we cover. Park Wood sits on or near the A274, which makes travel easy. Other places close to Park Wood include Otham (1 mile north-east), Willington (1 mile north), Boughton Monchelsea (1 mile south-west), Shepway (1 mile north) and Boughton Green (1 mile south-west). Larger places within reach include Ashford (15 miles south-east), Sittingbourne (11 miles north-east), Royal Tunbridge Wells (14 miles south-west), Gravesend (15 miles north-west), Tonbridge (12 miles west) and Faversham (15 miles east).
Local landmarks in Park Wood
Our customers here include homes close to St Martin's Church, Mote Park and Tree Tops Primary Academy, among other places. Also close by are New Line Learning Academy (1.1 miles north-west), Senacre Technology College (less than half a mile east) and The White Horse pub (0.8 miles north-east). The nearest railway station is Maidstone West station, roughly 2.6 miles north-west of the centre. Nearby you’ll also find Sutton Valence Castle (2.7 miles south-east) and The Mall Maidstone (2.5 miles north-west). Green spaces nearby include Detling Hill.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Prices and what affects them
Repairs from £95. Prices are worked out job by job. The main factors are:
- The material
- Access to the area
- How hard the colour is to match
- Previous DIY repairs that have to come out
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Good light, ideally daylight, without flash glare
- A picture taken from further back
- One sharp close-up of the damage
- The material, if you know it
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which usually takes two to three hours for most chips. If we find something your photos didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Before we arrive
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Have somewhere for us to park nearby if possible
Ask for a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
