Glasgow · Scotland

Bath chip & crack repair in Partick, Glasgow

Damaged bath in Partick? We repair it in place, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • Deep scratches in acrylic
  • Impact holes in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Partick homes

Common problems we fix in Partick

Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.

Clients typically contact us about:

  • A cracked acrylic bath
  • Chips caused by builders
  • Deep scratches in acrylic
  • Holes from dropped items

Comparing quotes

  • What aftercare is recommended
  • How your room will be protected
  • When it can be used again
  • The length of the guarantee and what it covers

Our hiring checklist

Bath repair in Partick without replacing anything

A typical bath repair is a few hours’ work, and you can generally bathe again the day after. You won’t need a plumber or tiler, because nothing is disconnected. Typical jobs include rusty patches near the plughole and damage done while the bathroom was being fitted, on pressed steel enamel, whirlpool & spa baths and cast iron enamel.

Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.

Area
Partick (G11, G12, G51)
Region
Glasgow
Guarantee
A year, on every repair
Quotes
From £95. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

What bath repair costs

Repairs from £95. You’ll know the full cost before booking. We take into account:

  • What kind of damage it is
  • Doing more than one item at once
  • Unusual colours or finishes
  • Any earlier repairs that need removing first

Our prices are the same across the UK, with no extra for Partick. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your photos

We price nearly every job from pictures. This is what to send:

  • Any earlier repairs or coatings
  • Any details about the material
  • A coin beside the damage so we can judge size
  • A clear, close picture of the problem area

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.

About Partick

Partick is about 2 miles north-west of Glasgow, in Glasgow. Wherever you are in the G11 postcode area, we come to you. Our repair technicians cover 183 places in Glasgow.

Every address in G11, G12 and G51 is within our area, from the main roads to the quietest streets. You’ll find streets such as Dyce Lane, Sandy Road and Sandy Lane, and we cover them all. With the A814 close by, Partick is simple for us to get to. Other places close to Partick include Partickhill (1 mile north), Thornwood (1 mile west), Dowanhill (1 mile north-east), Hyndland (1 mile north) and Broomhill (1 mile north-west). Larger places within reach include Calton (3 miles south-east), Langside (3 miles south), Yoker (3 miles north-west), Mount Florida (4 miles south-east), Hillpark (4 miles south) and Shawlands (3 miles south).

Around Partick

Typical jobs here are in homes near Elder Park, Curlers Rest pub and Hyndland Secondary School, among other places. Other local landmarks include Glasgow University Library (0.8 miles east), St Peter's Boys School (under half a mile east), Glasgow (under half a mile west) and Thornwood Primary School (under half a mile west). There’s a railway station in Partick itself: Partick station. Well-known places in the area include Western Infirmary (0.5 miles east) and Glasgow Museum of Transport (0.6 miles east). Open spaces near Partick include Castle Hill and Kilmardinny.

Map of Partick © OpenStreetMap contributors

How the visit works

Arrival times are agreed in advance, so you know when to expect us. On site, it takes two to three hours for most chips for most jobs. The room is left tidy.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Let us know if it has been repaired before
  • Tell us if there are stairs or a lift
  • Point us to the nearest place to park

How to get a price

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.

Get a fixed quote

Advice

When a repair is not the answer

In fairness, some problems need a different fix:

  • Leaking fittings, which need a plumber
  • Cracks in acrylic we can’t reach from underneath
  • Wear across the entire surface, which needs re-enamelling

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel

Looking after it afterwards

Once the work has cured, treat it gently:

  • Protect the bath with a towel when doing jobs nearby
  • Give the bath a quick rinse after use
  • Avoid scourers, wire wool and gritty cream cleaners
  • Don’t leave a fresh chip for long

In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine.

A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

Housing associations and facilities teams use us for planned and reactive repairs in Glasgow and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

What your bath is made of matters

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.

Partick questions

I tried a repair kit. Can you fix it?

Yes. We remove the old filler and start again. Tell us about it when you send photos.

Can pets and children be at home?

Just keep them out of the work area. We’ll tell you when the room can be used again.

Can you repair something that’s been repaired before?

Most of the time. Let us know what was used before and we’ll plan for it.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Glasgow.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.

Can you match an avocado or pink bath?

Yes. We mix the colour on the day to match, including pastel and older colours.

How soon can you come?

That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.

What happens next?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.