Kent · England
Bath Repair in Pearson's Green
Local bath repair for Pearson's Green: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- A failed DIY repair that’s discoloured or lifting
- Rust spots around the plughole
Bath repair in Pearson's Green without replacing anything
Most of our bath repairs take a few hours, and you can generally bathe again the day after. There’s no need to book a plumber or tiler, because nothing is disconnected. If you’re dealing with impact holes in acrylic and a cracked acrylic bath, we can generally put it right, whatever the material.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Pearson's Green (TN12)
- Area hub
- Kent
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Pearson's Green and the surrounding area
Pearson's Green is about 7 miles east of Tonbridge, in Kent. Jobs in Pearson's Green are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. We cover 922 places in Kent, from the larger towns to small villages. You can also see our page for London, about 32 miles away.
All of TN12 is within our area, from the main roads to the quietest streets. If you are just outside Pearson's Green, we cover Castle Hill (1 mile south-west), Mile Oak (1 mile west), Palmer's Green (1 mile south-west), Claygate (1 mile north-east) and Queen Street (2 miles north). We also work in nearby towns such as Maidstone (8 miles north-east), Sevenoaks (13 miles north-west), Royal Tunbridge Wells (7 miles west), Tonbridge (7 miles west), Kings Hill (8 miles north) and Foley Park (9 miles north-east).
What’s near Pearson's Green
Our clients here include homes close to Mascalls School and The Castle Inn. Pearson's Green’s nearest station is Paddock Wood station, roughly 2 miles north-west of the centre. A little further out are The Hop Farm Museum (2.6 miles north-west) and Tunbridge Wells Hospital (5.1 miles west).
Looking after it afterwards
It’s all simple stuff:
- Keep abrasive pads and gritty cleaners away from the bath
- Get a dripping tap fixed promptly
- Store metal items away from the bath
- Protect the bath with a towel when doing jobs nearby
Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust can start.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
When we would advise against a repair
We’d rather lose a job than do one that will not last, so these are the limits:
- Wear across the entire surface, which needs re-enamelling
- Acrylic cracks with no access behind them
- Flexing caused by a failed cradle or loose feet
If in doubt, send pictures and we will say what we think before booking.
Materials we work on in Pearson's Green
- Cast iron enamel
- Pressed steel enamel
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
Repairs by material
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, just like other baths.
How we price bath repair
Prices start from £95. We charge the same across the UK, including Pearson's Green. What changes the price is:
- What kind of damage it is
- Whether old repairs or coatings need taking off
- The material and finish
- How many items we do on one visit
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Getting a price from photos
Most quotes are done from photos alone. To help us price it:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- Details of any past repairs
Send us a picture of the damage and a wider shot of the entire item, with your TN12 postcode, and we’ll come back with a fixed quote.
How it works
We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take a few hours, depending on the damage, and the room is left clean and tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the next day, the bath is ready to use.
Preparing for the visit
- Ensure the room can be ventilated
- Let us know if it has been repaired before
- Tell us if there are stairs or a lift
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
Repair or replace: which is better?
Replacing a fitted bath generally means a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. Repairing it fixes just the damaged area in one visit. Our bath repair starts from £95. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- A year’s guarantee on all work
- CHAS and Constructionline accredited
- Nothing taken out or refitted
- Fixed prices from your pictures
See our full price list and guide to resurfacing and replacement costs.
When to call us in Pearson's Green
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
People generally call us after spotting one of these:
- Rust spots around the plughole
- Chips along the edge of the bath
- Cracks in an acrylic bath
- Deep scratches in acrylic
Comparing quotes
- Is the price fixed, and does it include VAT?
- What preparation is included
- How long the guarantee is and what it covers
- What happens if they find more damage
Common questions in Pearson's Green
Can you fix rust around the plughole?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Is a bath repair permanent?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Can you repair a failed DIY repair?
Regularly. We strip it out, deal with any rust and repair it again.
Is my repair covered?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair several things at once?
Yes. Doing several items on one visit typically costs less than separate visits. Send photos of everything you’d like done.
Towns and villages near Pearson's Green
More services for Pearson's Green
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
