West Berkshire · England
Bath chip & crack repair in Peasemore, West Berkshire
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Peasemore, with a one-year guarantee on every repair.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- A chip where the taps sit
Bath repair at your home in Peasemore
We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. We regularly repair roll-top & freestanding, acrylic and cast iron enamel, and common reasons people get in touch are cracks in an acrylic bath and an old repair that has yellowed or come loose.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Area
- Peasemore (RG20)
- County
- West Berkshire
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What we are called out for in Peasemore
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
These are the problems we are asked about most:
- A chipped rim or side
- Deep scratches in acrylic
- Hairline or through cracks in acrylic
- Rust by the waste and overflow
What your quote should include
- What aftercare is recommended
- Whether the colour is mixed to match
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
Can I fix it myself?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Landlord and trade work in Peasemore
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
What we cannot put right
A repair isn’t right for every job, for example:
- Wear across the whole surface, which needs re-enamelling
- Rust that has eaten right through a steel bath
- Acrylic cracks with no access behind them
Send us photos and we’ll tell you honestly before booking.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
Places near Peasemore
What else we do in Peasemore
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- The colour and finish to match
- Access to the area
- What the surface is made of
- The type of damage
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Getting a price from photos
Phone photos are fine, there is no need for anything special. Ensure they show:
- The postcode, so we can plan the visit
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- One picture of the whole bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- Rinse the bath after use, especially in hard water areas
- Protect the bath with a towel when doing jobs nearby
- Avoid scourers, wire wool and gritty cream cleaners
- Fix dripping taps early to stop staining and limescale
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.
What we do, step by step
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and the room is left clean and tidy.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can usually use the bath the day after.
Preparing for the visit
- Let the surface dry out before the visit
- Let us know if it has been repaired before
- Ensure the room can be ventilated
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Repairing versus replacing in Peasemore
Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. Repairing it leaves it where it is. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Nothing taken out or refitted
- Straight answers about what a repair can do
- One price list for the entire UK
- We come to you, anywhere in the UK
See our full price list or bath cost comparison.
Peasemore: your questions answered
How long does the repair take to cure?
Normally by the following day, though it depends on what we have done.
I tried a repair kit. Can you fix it?
Yes, we do this often. The old material comes out, any rust is treated, then we repair it properly.
What information do you need?
Send pictures through the quote form or call 0345 017 0787.
How invisible is a bath repair?
On a bath in good condition, a colour-matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there any odour?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
Peasemore and nearby
Peasemore is about 7 miles north of Newbury, in West Berkshire. We visit homes and businesses in Peasemore, so you don’t need to take anything anywhere. Peasemore is one of 155 places in West Berkshire where we work. You can also see our page for London, about 54 miles away.
Our repair technicians cover all of RG20. Whether you live on Field Road, The Pightle and Hillgreen Lane or a nearby road, we can come to you. Close by, we cover Leckhampstead (1 mile south-west), Beedon (2 miles east), Downend (2 miles south-east), North Heath (2 miles south) and World's End (2 miles east). Larger places within reach include Newbury (7 miles south), Thatcham (7 miles south-east), Burghfield Common (14 miles south-east), Speenhamland (6 miles south), Hungerford (9 miles south-west) and Calcot (13 miles east).
Near you in Peasemore
Around Peasemore, we work in homes near Church of St Barnabas and The Fox pub. Further afield, we also cover the area around Hampstead Norris Castle (4.5 miles east). Open spaces near Peasemore include Snelsmore Common.
About our accreditations · Every repair comes with a one-year guarantee.
