Essex · England
Bath chip & crack repair in Peldon, Essex
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Peldon and across Essex. Send pictures for a free, fixed quote.
- Repairs from £95
- Deep scratches in acrylic
- A chip where the taps sit
Questions from Peldon
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
How much does bath repair cost in Peldon?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Which areas do you work in?
We work UK-wide, so Peldon is covered. Prices do not change with location.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.
About our bath repair in Peldon
Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. Common call-outs are for a chipped rim or side and chips under the taps, across pressed steel enamel, cast iron enamel and acrylic.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Location
- Peldon (CO5)
- Region
- Essex
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
How to care for the repair
Once the work has cured, treat it gently:
- Avoid scourers, wire wool and gritty cream cleaners
- A dripping tap stains enamel, so fix it early
- Rinse the bath after use, especially in hard water areas
- Protect the bath with a towel when doing jobs nearby
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, then carry out the work, which normally takes a few hours, depending on the damage. If anything looks different from your photos, we will talk to you before going ahead.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the following day.
Getting ready for the visit
- Make sure the room can be ventilated
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
Ask for a price
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Related advice
Repairs by material
Cast iron
Cast iron is heavy and rigid, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.
What affects the price in Peldon
Repairs from £95. You’ll know the full cost before booking. We take into account:
- The colour and finish to match
- How many items we do on one visit
- The material and finish
- Where the damage is and how we get to it
There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
It only takes a minute to photograph the damage. Please include:
- A coin or ruler next to the damage for scale
- Good light, ideally daylight, without flash glare
- Any details about the material
- The postcode, so we can plan the visit
To get a price, send a couple of pictures using our quote form or call us. We’ll say straight away whether it can be repaired.
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the whole surface is tired, we may suggest re-enamelling instead. Prices start from £95. What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.
Why choose Surface Doctor in Peldon
- Work done at your home or business
- Straight answers about what a repair can do
- Typically one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
See our full price list or guide to resurfacing and replacement costs.
Do you need bath repair in Peldon?
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, any chip down to the metal will start to rust.
Look out for any of the following:
- A chip where the taps sit
- Snagging damage from a refit
- Rust by the waste and overflow
- A kit repair that didn’t last
What your quote should include
- The length of the guarantee and what it covers
- Aftercare advice
- Whether the price is fixed and includes VAT
- How the room is protected while they work
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Towns and villages near Peldon
Other services in Peldon
Honest limits
We won’t take on work that won’t last, so these are the limits:
- Acrylic cracks with no access behind them
- A bath worn all over, where resurfacing makes more sense
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
About Peldon
Peldon is about 5 miles south of Colchester, in Essex. We travel to clients in Peldon and the surrounding area, so you do not need to take anything anywhere. Peldon is one of 644 towns and villages in Essex where we work. You can also see our page for London, about 47 miles away.
Our visits in CO5 are booked in the same way as anywhere else. Whether you live on Church Road, St Ives Road and Lower Road or anywhere nearby, we can come to you. Nearby, we also work in Little Wigborough (1 mile south-west), Great Wigborough (2 miles south-west), Malting Green (2 miles north), Layer-de-la-Haye (3 miles north-west) and Layer Breton (3 miles west). Further out, we also cover Colchester (5 miles north), Braintree (15 miles west), Clacton-on-Sea (11 miles east), Maldon (11 miles south-west), Witham (11 miles west) and Camulodunum (5 miles north).
What’s near Peldon
Around Peldon, we work in homes near The Plough Public House and Church of St Mary the Virgin, among other places. For rail, the closest station is Wivenhoe station, about 4.3 miles north-east of the centre. Well-known places in the area include Birch Castle (3.5 miles north-west) and Essex County Hospital (5.1 miles north). For a walk, there is Abberton Reservoir.
About our accreditations · Every repair comes with a one-year guarantee.
