Herefordshire · England
Bath Repair in Pembridge
Damaged bath in Pembridge? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- A cracked acrylic bath
Bath repair in Pembridge without replacing anything
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. Common call-outs are for damage beneath the taps and scuffs and scratches in the surface, in roll-top & freestanding, cast iron enamel and pressed steel enamel.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Pembridge (HR6)
- Region
- Herefordshire
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Wear across the entire surface, which needs re-enamelling
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Whirlpool & spa baths
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Do not leave a fresh chip for long
- Stick to mild cleaners and a soft cloth
- Get a dripping tap fixed promptly
- Ensure an acrylic bath is firm underfoot
A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners and rinse after use.
Stop using the bath if a crack lets water through until it’s repaired. Leaks under a bath can damage floors and ceilings.
Do you need bath repair in Pembridge?
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Most people get in touch when they notice something like this:
- Cracks in an acrylic bath
- Deep scratches in acrylic
- Holes from dropped items
- A kit repair that didn’t last
What your quote should include
- How to care for the finish
- Whether a trained technician does the job
- How changes to the job are handled
- How soon you can use it again
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours. We tidy up before we leave and tell you when it’s ready to use.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, generally by the following day, the bath is ready to use.
Preparing for the visit
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
- Mention any parking restrictions or tricky access
Ask for a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Towns and villages near Pembridge
Also in Pembridge
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details and we will handle the rest.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
Pembridge and nearby
Pembridge is about 13 miles north-west of Hereford, in Herefordshire. We agree a date that works for you, and you will know when to expect us, so there is no waiting around. We work in all 255 towns and villages in Herefordshire, from the larger towns to small villages. We work right across the region, from Pembridge to Birmingham (46 miles away).
Every address in HR6 is within our area, from the main roads to the quietest streets. Whether you live on High Street, West Street and Suckley Lane or anywhere nearby, a technician can come to you. Close by, we cover Eardisland (2 miles east), Shobdon (2 miles north), Shirl Heath (3 miles east), Mortimer's Cross (4 miles north-east) and Kingsland (4 miles north-east). We also work in nearby towns such as Hereford (13 miles south-east), Leominster (6 miles east), Redhill (14 miles south-east), Newton Farm (14 miles south-east), Whitecross (13 miles south-east) and Eign Hill (14 miles south-east).
Landmarks near Pembridge
Our clients here include homes close to The New Inn, Church of St Mary and Pembridge CofE Primary School, among other places. Well-known places in the area include Milton House Mound (1.8 miles north). For a walk, there’s Titley Pool and Titley Pool.
Questions from Pembridge
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. We tint the finish to your bath on site.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
What does bath repair cost?
Prices start from £95. We give a fixed quote based on photos of the damage. Send a close-up and a picture of the whole item with your HR6 postcode.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we will ask for another angle.
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
What your bath is made of matters
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so repair chips early.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Prices and what affects them
Prices start from £95. There’s no area surcharge for Pembridge. What changes the price is:
- What kind of damage it is
- How hard the colour is to match
- Access to the area
- The material and finish
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Send photos for a quote
It only takes a minute to photograph the damage. Try to send:
- Any details about the material
- A close-up of the damage, in focus
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
